PXIe-416x Current and Open-Sense Protection Accessory

This document explains how to install and use the following accessories with a corresponding PXIe-4162/PXIe-4163 precision source measure unit (SMU):
  • ACC-4162-1—PXIe-4162 Current and Open-Sense Protection Accessory (part number 788403-01)
  • ACC-4163-1—PXIe-4163 Current and Open-Sense Protection Accessory (part number 788404-01)
  • In addition, this document contains accessory specifications.

    The ACC-4162-1 and ACC-4163-1 modify the behavior of the corresponding PXIe-416x SMU to provide the following benefits:

    • Output regulation provided by a high-impedance connection between force and sense lines for scenarios where the sense lines disconnect from the DUT.
    • Enhanced protection for the module, system, and DUT by limiting fast transient current spikes in the following scenarios:
      • The DUT shorts to ground
      • The DUT is charged to a voltage that does not match the SMU output voltage
    Notice This device is intended for use only with the corresponding PXIe-4162/PXIe-4163 SMU.

    Read this document before you install, configure, operate, or maintain this product. Users are required to familiarize themselves with installation and wiring instructions in addition to requirements of all applicable codes, laws, and standards.

    The Additional Resources section describes how to locate more information about your product, including specifications, pinouts, and instructions for connecting, installing, and configuring your system.

    Caution Observe all instructions and cautions in the user documentation. Using the product in a manner not specified can damage the product and compromise the built-in safety protection.
    Attention Suivez toutes les instructions et respectez toutes les mises en garde de la documentation d'utilisation. L'utilisation du produit de toute autre façon que celle spécifiée risque de l'endommager et de compromettre la protection de sécurité intégrée.