Components of a PXIe-4151 System
- Updated2025-09-26
- 2 minute(s) read
The PXIe-4151 is designed for use in a system that includes other hardware components, drivers, and software.
Notice A system and the
surrounding environment must meet the requirements defined in PXIe-4151
Specifications.
The following list defines the minimum required hardware and software for a system that includes a PXIe-4151.
| Component | Description and Recommendations |
|---|---|
PXI Chassis |
A PXI chassis houses the PXIe-4151 and
supplies power for PXIe-4151 functions.
Note NI recommends
installing the PXIe-4151 in a chassis
with slot cooling capacity ≥58 W for
increased module capability. |
PXI Controller or PXI Remote Control Module |
You can install a PXI controller or a PXI remote control (MXI) module depending on your system requirements. These components, installed in the same PXI chassis as the PXIe-4151, interface with the instrument using NI device drivers. |
Auxiliary Power Supply |
An auxiliary 48 V power source provides output power from the PXI system and accommodates the power demand for applications. Refer to Using Auxiliary Power with the PXIe-4151 for more information. |
Cables and Accessories |
Cables and accessories allow connectivity to/from your instrument for measurements. Refer to Cables and Accessories for recommended cables and accessories and guidance. |
NI-DCPower Driver |
Instrument driver software that provides functions to interact with
the PXIe-4151 and execute measurements
using the PXIe-4151. Note NI recommends using
the most current version of NI-DCPower with the PXIe-4151. |
NI Applications |
NI-DCPower offers driver support for the following applications:
|
Related Information
- Using Auxiliary Power with the PXIe-4151
To achieve the optimum power output from the PXI system and accommodate the power demand for applications, you must use an auxiliary 48 V power source with the PXIe-4151. This section provides information on determining the power needs and using auxiliary power for your applications.
- Cables and Accessories
- Programming Options
You can generate signals interactively using InstrumentStudio or you can use the NI-DCPower instrument driver to program your device in the supported ADE of your choice.