The PXIe-4151 supports remote status monitoring and power state control through a female 15-pin connector on the rear panel. The following table shows the 15-pin connector pinout.

Table 15. Remote Control Monitoring Connector Pinout
Pin Signal
1 Logic ground
2 Not connected
3 Fault output (active high)
4

Power state output

  • High = Not inhibited
  • Low = Inhibited
5 Inhibit input (active low)
6 Not connected
7 Not connected
8 Not connected
9 Logic ground
10 Not connected
11 Not connected
12 Logic ground
13 Not connected
14

Remote Inhibit input

  • High/float = Default mode (not inhibited)
  • Low = Manual mode (inhibited)
15 Logic ground

Refer to the PXIe-4151 Specifications for the Inhibit signal input requirements.