Follow these guidelines to use the PXIe-1081 safely.

Notice For comprehensive safety information, refer to the safety, environmental, and regulatory information document that shipped with your hardware.
Caution Observe all instructions and cautions in the user documentation. Using the product in a manner not specified can damage the product and compromise the built-in safety protection.
Caution Do not operate the PXIe-1081 in environments where flammable gases are present. The chassis is not rated for explosive atmospheres and may ignite gases or fumes.
Caution Do not remove protective covers while the chassis is powered. Dangerous voltages may be present. Only qualified service personnel should access internal components.
Caution Always disconnect all power cords before servicing the chassis or replacing components such as fan assemblies.
Caution Use only exact electrical and mechanical replacement parts when servicing the chassis. Substituting incompatible components may result in damage or safety hazards.
Notice Avoid using harsh chemical cleaning agents such as benzene, toluene, xylene, or acetone. These substances may damage the chassis surfaces and components.
Note The chassis must be connected to an earth safety ground during use. If the AC outlet lacks a ground connection, use a 16 AWG wire to connect the grounding screw to permanent earth ground.

Product Certifications and Declarations

Refer to the product Declaration of Conformity (DoC) for additional regulatory compliance information. To obtain product certifications and the DoC for NI products, visit ni.com/product-certifications, search by model number, and click the appropriate link.