Connecting the PXIe-1081 to a Power Source
- Updated2025-11-05
- 1 minute(s) read
Learn how to connect power and verify chassis startup behavior.
Note Do not install modules before completing the power-on test.
Disconnect all power cords to fully remove power.
- Locate the AC inlet on the rear panel.
- Use a suitable AC power cable.
Complete the following steps to connect the PXIe-1081 to a power source.
- Attach input power through the AC inlet.
-
Press and hold the Power Inhibit button for 4 seconds.
All fans begin operating and the Status LED turns steady green.
Related Information
- PXIe-1081 Front Panel
The front panel includes controls and indicators that support chassis operation. Users can identify key components and access points for system setup and monitoring.
- PXIe-1081 Rear Panel
The rear panel includes interfaces for power, cooling, synchronization, and control. These connections support system integration and thermal management.
- Status LED
The Status LED, located on the front panel of the chassis, provides a quick visual indication of the operational state of the chassis.
- Part Numbers for PXIe-1081 Recommended Cables and Accessories
Use part numbers to purchase the cables and the accessories for optimizing the performance of the PXIe-1081.