Components of a PCIe-6509 System

The PCIe-6509 is designed for use in a system that may require hardware, drivers, and software to optimize PCIe-6509 for your application. Use the minimum required PCIe-6509 system components as a starting point for building your system.

Note A system and the surrounding environment must meet the requirements defined in the relevant specifications document(s).
Table 2. Minimum Required PCIe-6509 System Components
Component Description and Recommendations
PC with PCIe Slot
1378

 You need to insert the PCIe-6509 into an applicable PCIe system slot on your PC.
DIO Module
1378

 Your digital I/O module.
Cables and Accessories
1378

 Cables and accessories allow connectivity to/from your instrument for measurements. Refer to Part Numbers for Recommended Cables and Accessories for recommended cables and accessories and guidance.
NI-DAQmx
1378

 Instrument driver software that provides functions to interact with the PCIe-6509 and execute measurements using the PCIe-6509.
Note NI recommends always using the most current version of NI-DAQmx with the PCIe-6509. You can find the NI-DAQmx driver requirements in the NI-DAQmx Readme.
NI Applications
1378

 NI-DAQmx offers driver support for the following applications:
  • LabVIEW
  • LabWindows/CVI
  • SignalExpress
  • Measurement Studio
  • ANSI C
  • Python

Part Numbers for Recommended Cables and Accessories

Use part numbers to purchase the cables and accessories NI recommends to optimize the performance of PCIe-6509.

Notice Operate this product only with shielded cables and accessories. Do not use unshielded cables or accessories unless they are installed in a shielded enclosure with properly designed and shielded input/output ports and connected to the product using a shielded cable. If unshielded cables or accessories are not properly installed and shielded, the EMC specifications for the product are no longer guaranteed.
Table 3. Part Numbers for Recommended Cables and Accessories
Accessory/Cable Description Part Number
SH100M-100M Flex Multifunction Cable Shielded, 1 m and 2 m lengths, formerly known as the SH100-100-F cable 185095-01/02
SCB-100A I/O Connector Block Shielded 785024-01
R1005050 Connection Ribbon Cable Unshielded, 0.5 m, 1 m, and 2 m lengths, conversion to two 50-pin connectors 182762-01/02/0R5
CB-50 Connector Block DIN-Rail Mount, unshielded 776164-90
CB-50LP Connector Block Panel Mount, unshielded 777101-01
CB-100 I/O Kit Cable included in kit, unshielded 777812-01
Note Visit DAQ Multifunction I/O Cable and Accessory Compatibility on ni.com for more information about supported cables and accessories for your instrument.

Programming Options

You can use the NI-DAQmx to communicate with and control the PCIe-6509 and program your device in the supported ADE of your choice.

The NI-DAQmx driver includes a library of functions and VIs you can call from your application software to program your module.

  • LabVIEW or LabWindows/CVI—Available on the LabVIEW Functions palette at Measurement I/O » NI DAQmx. Examples are available from the Start menu in the National Instruments folder.
  • ANSI C—For instructions to manually add all required library files to your project, refer to the ANSI C Application without LabWindows/CVI section in the NI-DAQmx User Manual.
  • .NET—For instructions to use NI-DAQmx to create .NET applications, refer to the Creating a .NET Application without Measurement Studio section in the NI-DAQmx User Manual.
  • SignalExpress—For instructions to take an NI-DAQmx measurement in SignalExpress, refer to the Taking an NI-DAQmx Measurement in SignalExpress document from the Help » DAQ Assistant in SignalExpress Help.
  • Python—For more information about using Python to interact with NI-DAQmx, refer to NI-DAQmx Python Documentation.