Changing from Manual to Automatic Mode

  1. Undo all changes that you have made to the required values of the last operation point.
  2. Click auto in the control button area.
  3. If the needed parameters are not set and cannot be reached by the system, a message box indicates that changing modes is not possible. In this case, complete the following steps:
    1. Click all buttons with a red LED, e.g., for engaging or disengaging the clutch, change to the correct control mode etc.
    2. Shift the speed and other parameters as close to the values shown in column Set 2 as possible. The automatic mode is activated. If possible (i.e., if the setpoint values can be set) the automatic execution is continued.
    The settings done by previous steps of the automatic mode that are necessary for the execution of the current step are executed first; this may take a little time.