NI-SWITCH Codes

Error Code Hexadecimal Code Error and Status Code Description
1073356801 0x3FFA2001 NISWITCH_WARN_PATH_REMAINS Some connections remain after disconnecting.
1073356802 0x3FFA2002 NISWITCH_WARN_IMPLICIT_CONNECTION_EXISTS The channels are implicitly connected.
-1074130943 0xBFFA1001 NISWITCH_ERROR_TRIGGER_NOT_SOFTWARE The trigger source is not a software trigger.
-1074126847 0xBFFA2001 NISWITCH_ERROR_INVALID_SWITCH_PATH Invalid path string.
-1074126846 0xBFFA2002 NISWITCH_ERROR_INVALID_SCAN_LIST Invalid Scan List string.
-1074126845 0xBFFA2003 NISWITCH_ERROR_RSRC_IN_USE One of the channels is a configuration channel that is in use or is a common multiplexer channel that is in use.
-1074126844 0xBFFA2004 NISWITCH_ERROR_EMPTY_SCAN_LIST The scan list string is empty.
-1074126843 0xBFFA2005 NISWITCH_ERROR_EMPTY_SWITCH_PATH The path string is empty.
-1074126842 0xBFFA2006 NISWITCH_ERROR_SCAN_IN_PROGRESS The switch module is currently in scanning mode, and the operation cannot be performed at this time.
-1074126841 0xBFFA2007 NISWITCH_ERROR_NO_SCAN_IN_PROGRESS The switch module is not currently in scanning mode, and the operation cannot be performed at this time.
-1074126840 0xBFFA2008 NISWITCH_ERROR_NO_SUCH_PATH No explicit path exists between the two channels.
-1074126839 0xBFFA2009 NISWITCH_ERROR_IS_CONFIGURATION_CHANNEL You cannot make an explicit connection to a configuration channel.
-1074126838 0xBFFA200A NISWITCH_ERROR_NOT_A_CONFIGURATION_CHANNEL One of the non-terminal channels in the path is not a configuration channel.
-1074126837 0xBFFA200B NISWITCH_ERROR_ATTEMPT_TO_CONNECT_SOURCES You cannot make a connection between two different sources.
-1074126836 0xBFFA200C NISWITCH_ERROR_EXPLICIT_CONNECTION_EXISTS An explicit connection between the channels already exists.
-1074126835 0xBFFA200D NISWITCH_ERROR_LEG_MISSING_FIRST_CHANNEL A leg in the path does not begin with a channel name.
-1074126834 0xBFFA200E NISWITCH_ERROR_LEG_MISSING_SECOND_CHANNEL A leg in the path is missing the second channel.
-1074126833 0xBFFA200F NISWITCH_ERROR_CHANNEL_DUPLICATED_IN_LEG The first and second channels in the leg are the same.
-1074126832 0xBFFA2010 NISWITCH_ERROR_CHANNEL_DUPLICATED_IN_PATH A channel name is duplicated in the path string.
-1074126831 0xBFFA2011 NISWITCH_ERROR_PATH_NOT_FOUND No path was found between the two channels.
-1074126830 0xBFFA2012 NISWITCH_ERROR_DISCONTINUOUS_PATH The first channel of a leg in the path is not the same as the second channel in the previous leg.
-1074126829 0xBFFA2013 NISWITCH_ERROR_CANNOT_CONNECT_DIRECTLY The path contains a leg with two channels that cannot be directly connected.
-1074126828 0xBFFA2014 NISWITCH_ERROR_CHANNELS_ALREADY_CONNECTED A leg in the path contains two channels that are already directly connected.
-1074126827 0xBFFA2015 NISWITCH_ERROR_CANNOT_CONNECT_TO_ITSELF A channel cannot be connected to itself.
-1074126826 0xBFFA2016 NISWITCH_ERROR_MAX_TIME_EXCEEDED Maximum time exceeded before the operation completed.
-1074118655 0xBFFA4001 NISWITCH_ERROR_SESSION_ALREADY_OPEN Another process has already opened a session to this switch module.
-1074118654 0xBFFA4002 NISWITCH_ERROR_INVALID_RESOURCE_DESCRIPTOR Invalid resource name.
-1074118653 0xBFFA4003 NISWITCH_ERROR_SCANNING_NOT_SUPPORTED You have set an attribute or called a function that is only used for scanning, and this switch module does not support scanning (or this module does not support scanning in the current topology).
-1074118652 0xBFFA4004 NISWITCH_ERROR_MUST_SPECIFY_MODULE You have indicated that a non-cabled module should get its trigger from the rear connector, and the niSwitch software could not automatically detect which cabled module to route the trigger from. Be more specific (ie, specify Rear Connector of Module X).
-1074118651 0xBFFA4005 NISWITCH_ERROR_MODULE_FIFO_LENGTH_EXCEEDED The scan list commands exceeds the size of memory on the switch module.
-1074118650 0xBFFA4006 NISWITCH_ERROR_HW_COMMUNICATE_TMO Error communicating with hardware. Internal timeout occurred waiting for hardware response.
-1074118649 0xBFFA4007 NISWITCH_ERROR_TTL_BUS_REQUIRED Expecting trigger or scan advanced bus to be one of the TTL lines (TTL 0-TTL 7).
-1074118648 0xBFFA4008 NISWITCH_ERROR_MODULE_IS_BBM_ONLY This module requires scan mode to be Break Before Make.
-1074118647 0xBFFA4009 NISWITCH_ERROR_1127_TTL1_CONFLICT TTL 1 conflict detected. SCXI 1127 modules constantly use the TTL 1 line. Use a different line, or power down the chassis and remove all 1127 modules from it.
-1074118645 0xBFFA400B NISWITCH_ERROR_INVALID_DRIVER_SETUP_STRING The driver setup string is invalid.
-1074118644 0xBFFA400C NISWITCH_ERROR_TOPOLOGY_NOT_SUPPORTED No legacy device supports the specified topology. Use a different topology, or configure the device under DAQmx and use the DAQmx resource descriptor.
-1074118643 0xBFFA400D NISWITCH_ERROR_INVALID_TOPOLOGY The specified topology string is invalid.
-1074118642 0xBFFA400E NISWITCH_ERROR_HARDWARE_UNEXPECTEDLY_RESET The device was unexpectedly power cycled. Close and re-open the session.
-1074118641 0xBFFA400F NISWITCH_ERROR_HANDSHAKING_INITIATION_CONFLICT The values for Handshaking Initiation and Trigger Input are incompatible. An Immediate Trigger Input is not compatible with Measurement Device Initiated (or DMM Initiated) Handshaking Initiation.
-1074118639 0xBFFA4011 NISWITCH_ERROR_DAQMX_DESCRIPTOR_LEGACY_RSC_TYPE A DAQmx resource descriptor was specified, but the driver setup string specifies a Legacy resource type.
-1074118638 0xBFFA4012 NISWITCH_ERROR_AMBIGUOUS_MODEL_CODE Model code specified in the driver setup string is ambiguous. Multiple switches match the specified model code.
-1074118637 0xBFFA4013 NISWITCH_ERROR_TRIGGER_INPUT_NOT_SUPPORTED The trigger input specified is not supported by the device.
-1074118636 0xBFFA4014 NISWITCH_ERROR_INVALID_TERMINALBLOCK_FOR_TOPOLOGY The configured terminal block is invalid for current topology.
-1074118635 0xBFFA4015 NISWITCH_ERROR_CANT_INVERT_WHEN_SOURCE_EQUALS_DEST Signal cannot be inverted when the signal source equals the destination.
-1074118634 0xBFFA4016 NISWITCH_ERROR_CONFLICTING_TRIGGER_ROUTE_EXISTS Requested trigger route cannot be made because a conflicting trigger route already exists.
-1074118633 0xBFFA4017 NISWITCH_ERROR_INVALID_VALUE_FOR_DEVICE This device does not support the specified value for this attribute or operation.
-1074118632 0xBFFA4018 NISWITCH_ERROR_TRIGGER_POLARITY_CONFLICT Trigger input polarity and scan advanced output polarity must be the same on this particular switch device.
-1074118629 0xBFFA401B NISWITCH_ERROR_RESERVATION_ERROR Reservation error.
-1074118628 0xBFFA401C NISWITCH_ERROR_ANALOG_BUS_INVALID Analog bus invalid
-1074118627 0xBFFA401D NISWITCH_ERROR_POWER_LIMIT_EXCEEDED Power limit exceeded for the switch carrier.
-1074118626 0xBFFA401E NISWITCH_ERROR_DEVICE_SELF_TEST_FAILED Device self-test failed.
-1074118625 0xBFFA401F NISWITCH_ERROR_CARD_DETECTED_DOES_NOT_MATCH_EXPECTED_CARD One or more cards for your NI SwitchBlock device have been inserted and or removed while your system was powered on. This can lead to unexpected behavior. Restart your system.
-1074118624 0xBFFA4020 NISWITCH_ERROR_ANALOG_BUS_STATE_INCONSISTENT An expansion bridge has been inserted or removed while your system is powered on. This can lead to unexpected behavior. Restart your system.
-1074118623 0xBFFA4021 NISWITCH_ERROR_FIVE_VOLT_DETECT_FAILED The 5 V fuse on your NI SwitchBlock carrier is blown. Refer to your documentation for help with replacing the fuse.
-1074118622 0xBFFA4022 NISWITCH_ERROR_SLOT_POWER_LIMIT_EXCEEDED Power limit exceeded for a specific slot in the switch carrier.
-1074118621 0xBFFA4023 NISWITCH_ERROR_CANNOT_EXCEED_RELAY_DRIVE_LIMIT The number of relays attempted to be driven on this device has exceeded the relay drive limit for this device.
-1074118620 0xBFFA4024 NISWITCH_ERROR_INVALID_CONNECTION_LIST Invalid NI-SWITCH connection list.
-1074118619 0xBFFA4025 NISWITCH_ERROR_DISCONNECTION_PATH_NOT_SAME_AS_EXISTING_PATH Disconnection path is not the same as the existing path.
-1074118618 0xBFFA4026 NISWITCH_ERROR_INVALID_RELAY_NAME Specified relay name is invalid for this device.
-1074118617 0xBFFA4027 NISWITCH_ERROR_ANALOG_BUS_SHARING_DIFFERENT_WIRE_MODES Unable to connect channels composed of different wire modes through the analog bus. Disconnect any devices of different wire modes from the analog bus before routing this device through the analog bus.