Use the NI-DCPower Source VIs to configure the source unit.

DC Voltage
Use the NI-DCPower DC Voltage VIs for changing channel settings when the channel is configured for the DC Voltage output function.
DC Current
Use the NI-DCPower DC Current VIs for changing channel settings when the channel is configured for the DC Current output function.
Pulse Voltage
Use the NI-DCPower Pulse Voltage VIs for changing channel settings when the channel is configured for the Pulse Voltage output function.
Pulse Current
Use the NI-DCPower Pulse Current VIs for changing channel settings when the channel is configured for the Pulse Current output function.
Advanced Sequencing
Use the NI-DCPower Advanced Sequence VIs for configuring the source and measure unit with a series of property or attribute values. You must set the source mode to Sequence.
niDCPower Configure Source Mode With Channels VI
Configures the Source Mode property. Specifies whether to run a single output point or a sequence.
niDCPower Set Sequence VI
Configures a series of voltage, current, resistance or power outputs and corresponding source delays. The source mode must be set to Sequence for this VI to take effect.
niDCPower Configure Output Function VI
Configures the function that the specified channels attempt to generate.
niDCPower Configure Output Enabled VI
Enables or disables generation on the specified channel(s).

Parent topic: NI-DCPower

NI-DCPower LabVIEW VI Reference

Log in to get a better experience