Complete the following steps to install a C Series module.

Figure 18. Installing C Series Modules


  1. Verify that power is not connected to the I/O connector(s) on the C Series module. If the system is in a nonhazardous location, the NI-9145 can be powered on when you install modules.
  2. Press the latches on the C Series module.
  3. Align the C Series module with a slot and seat it in the slot until the latches lock in place.

Removing C Series Modules

Verify that power is not connected to the I/O connector(s) on the C Series module before you remove a module from the NI 9145. If the system is in a nonhazardous location, the NI 9145 can be powered on when you remove modules.