FD-11614 is designed for use in a system that might require hardware, drivers, and software to optimize FD-11614 for your application. Use the minimum required FD-11614 system components as a starting point for building your system.

Note A system and the surrounding environment must meet any requirements defined in the relevant specifications documents.
Figure 1. FieldDAQ Installation Supply List


  1. Host Computer running Windows or NI Linux RT
  2. Application Software
  3. NI-DAQmx Driver
  4. FieldDAQ Device
  5. 5-pin L-coded M12 Power Input Cable
  6. 8-pin X-coded M12 Ethernet Cable
  7. External Power Supply
  8. B, E J, K, N, R, S, and/or T Thermocouples with Mini TC Connectors
Note You can either use a shielded straight-through Ethernet cable or an Ethernet crossover cable to connect the FieldDAQ device directly to your computer.