Connecting the cRIO-9803 to a CompactRIO Controller

Complete the following steps to connect the cRIO-9803 to a cRIO Controller using the USB upstream-facing port

What to Use

  • cRIO-9803
  • CompactRIO controller
  • One of the following USB cables:
    • Type-C to Type-C USB cable, provided in the shipping kit
    • Type-C to Type-A USB cable, user-provided

What to do

Figure 30. Connecting the Module to a Controller

1378

  1. Power off the CompactRIO controller.
  2. Connect one end of the USB cable to any available USB Type-C host port on the CompactRIO controller.
  3. Secure the USB connector to the CompactRIO controller using the retention screw.
  4. Connect the other end of USB cable to the USB Type-C upstream-facing port on the module.
  5. Secure the USB connector to the module using the retention screw.
  6. Power on the CompactRIO controller.
  7. Verify the Power/Status LED is on, solid or flashing, indicating drive activity.