The current transducer input is a 9-pin D-sub connector (DB9) that measures the output of the transducer used to sense current from the DUT.

Figure 4. BTS-16110 Current Transducer Input Port

Current Transducer Input Port

Connect this port to the transducer current with one of the cable accessories.
  • SHDB9M-DB9F Cable—Use for current output. SHDB9M-DB9F is a male-female cable that connects directly between the DB9 connector on the current transducer and BTS-16110.
  • SHDB9M-DB9F-BNCM Cable—Use for voltage output. SHDB9M-DB9F-BNCM includes an additional male BNC connector used with the voltage output of the current transducer.
    • Note Refer to your specific current transducer to determine the cable accessory to interface with BTS-16110.