Gather the following components to connect a current transducer with current output.
  • Current transducer
  • SHDB9M-DB9F cable

Complete the following steps.

  1. Power off BTS-16110 and the system you are connecting to BTS-16110.
    Caution You must de-energize the system before you connect it to BTS-16110 for measurement. Follow all workplace safety requirements for powering down hazardous voltage systems based on the applicable codes and standards in your location.
  2. Connect the female D-sub connector on the SHDB9M-DB9F cable to the D-sub port on the transducer and tighten the retention screws.
  3. Connect the male D-sub connector on the SHDB9M-DB9F cable to the current transducer input port on the BTS-16110 and tighten the retention screws.
    Figure 13. Connecting a Current Transducer for Current Output

    Connecting a Current Transducer for Current Output

  4. Power on BTS-16110 and the system you are connecting to BTS-16110.