CompactDAQ USB Configuration Cable

Tip Refer to the getting started guide on ni.com/manuals for basic configuration
instructions and information about connecting to a host computer using the USB
device port. NI recommends using the USB device port for configuration, debug,
and maintenance.

This guide is intended to cover mounting, connectors, power supply and cables for use with your CompactDAQ Controller and CompactDAQ Chassis. It does not explicitly cover other NI product families such as CompactRIO System or C Series Module. It also does not cover legacy or End of Life (EOL) parts or products. 

Note: Using the page search functionality in your browser to locate your model may speed up this process. This is typically CTRL+F on Windows or ⌘+F on MacOS.

Note: N/A = Not Applicable

Note: P/N = Part Number

¹The USB configuration cable is only compatible with CompactDAQ controller running LabVIEW Real Time. This cable is not required for  CompactDAQ controller running Windows OS.

For more information on any of the listed NI orderable parts, please visit http://www.ni.com/contact-us/ to contact an NI representative. Most NI orderable parts listed in this guide without a product page can still be purchased by contacting NI.

• C Series I/O Cable & Accessory Compatibility Guide
• CompactRIO System Accessory Compatibility Guide