July 2021
This file contains installation instructions and compatibility information for NI Industrial Controller Device Drivers.
You can find more release information on ni.com.
Application and Driver Software Support
Product Security and Critical Updates
Automating the Installation of NI Products
Using NI Software with Microsoft Windows 10
NI Industrial Controller Device Drivers allows you to configure Industrial Controller devices and control their digital I/O. This release supports the following hardware:
Refer to the NI Industrial Controller website at ni.com/industrial-controller for the latest information about NI Industrial Controller Device Drivers.
NI Industrial Controller Device Drivers has the following requirements:
NI Industrial Controller Device Drivers supports the following operating systems:
Note NI Industrial Controller Device Drivers no longer supports Windows Vista/XP/7/8.x, Windows Server 2003/2008/2012, or any 32-bit Windows operating system. NI Industrial Controller Device Drivers 21.0 will not install or run on an unsupported OS. You cannot deploy or distribute applications that use NI Industrial Controller Device Drivers 21.0 to an unsupported OS. Additionally, after installing NI Industrial Controller Device Drivers 21.0, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.
For more information about the changes to our OS support, visit https://www.ni.com/r/win32bitsupport.
NI Industrial Controller Device Drivers supports the following application software versions, including service packs.
NI Application Software or Driver Software | Versions Supported by NI Industrial Controller Device Drivers |
---|---|
NI LabVIEW | 2018, 2019, 2020, 2021 |
NI LabVIEW Real-Time Module | 20181, 2019, 2020, 2021 |
NI LabVIEW FPGA Module | 2018, 2019, 2020, 2021 |
NI Vision Development Module | 2015 SP1 or later |
NI Vision Acquisition Software | February 2016 or later |
NI Vision Builder for Automated Inspection | IC-3120, 3121, and 3173—2015 or later IC-3171 and 3172—2015 f1 or later |
1 Industrial Controller 21.0 and later will not install to Linux RT targets running LabVIEW Real-Time 2018.
Download the NI Industrial Controller Device Drivers installer from ni.com/downloads. NI software includes NI Package Manager to handle the installation. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.
Notes
Visit ni.com/security to view and subscribe to receive security notifications about NI products. For information about critical updates from NI, refer to Available Critical and Security Updates for NI Software.
The following list describes the new features in NI Industrial Controller Device Drivers 21.0
Documentation is installed onto your hard drive with NI Industrial Controller Device Drivers. To view the documentation, select Start»All Programs»National Instruments»Industrial Controller.
Refer to the National Instruments Product Manuals Library at ni.com/manuals for the most recent versions of product documentation.
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.
For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager manual.
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, refer to NI Product Compatibility for Microsoft Windows 10.
Copyright
© 2016–2021 National Instruments Corporation. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
375780J-01