From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
July 2021
This file contains important information about NI-488.2, including installation instructions, new features, and a partial list of bugs fixed for NI-488.2.
If you plan to use LabVIEW NXG, refer to LabVIEW NXG Support and Considerations.
Product Security and Critical Updates
LabVIEW NXG Support and Considerations
Automating the Installation of NI Products
Using NI Software with Microsoft Windows 10
Unsupported Windows Operating Systems
NI Software Drops Support for Phar Lap ETS Real-Time Operating System in 2022
NI-488.2 supports the following operating systems:
Note Refer to Unsupported Windows Operating Systems for more information about support for Microsoft Windows OSes.
Note NI-488.2 no longer supports Windows Vista/XP/7/8.x, Windows Server 2003/2008/2012, or any 32-bit Windows operating system. NI-488.2 21.0 will not install or run on an unsupported OS. You cannot deploy or distribute applications that use NI-488.2 21.0 to an unsupported OS. Additionally, after installing NI-488.2 21.0, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.
For more information about the changes to our OS support, visit https://www.ni.com/r/win32bitsupport.
Note Support for Windows 32-bit operating systems may require disabling physical address extension (PAE). To learn how this might affect your system and what actions you might need to take, visit ni.com/info and enter the Info Code PAESupport.
NI-488.2 21.0 supports the following application software versions, including service packs. If you are not using NI application software, refer to Microsoft Visual Studio Support.
| Application Software | Versions Supported by NI-488.2 |
|---|---|
| NI-VISA | 21.0 |
| LabVIEW | 2018, 2019, 2020, 2021 |
| LabVIEW Real-Time Module | 2018, 2019, 2020, 2021 |
| LabVIEW NXG | 5.0 |
| LabWindows™/CVI™ | 2015, 2017, 2019 |
| Measurement Studio | 2019 |
Note: NI I/O Trace 17.0 and later support NI-488.2 17.0. Previous versions of NI I/O Trace do not support NI-488.2 17.0 or later.
If you are using the NI-488.2 .NET Class Library, .NET Framework 4.0 (minimum) is required. The NI-488.2 .NET Class Library can be used with Visual C# or Visual Basic .NET in any Visual Studio version that can target .NET Framework 4.0 or .NET Framework 4.5.
To use the .NET API, you must install the .NET class libraries or the .NET wrapper in addition to the NI device driver. For information about versions of the .NET Framework and the drivers each supports, as well as the download location of the installer files, refer to National Instruments .NET Support.
NI-488.2 supports 32-bit Visual Basic 6.0 application development. For more information, refer to the Language-Specific Programming Instructions topic in the NI-488.2 Help.
NI-488.2 supports 32-bit and 64-bit GPIB applications using Microsoft Visual C++ 2005 and later. Microsoft Visual C/C++ 6.0 and Microsoft Visual Studio .NET 2003 only support 32-bit GPIB applications. For more information, refer to the Language-Specific Programming Instructions topic in the NI-488.2 Help.
The following list details the hardware models supported in NI-488.2:
| GPIB Hardware | Windows 10/Server 2016/Server 2019 | LabVIEW Real-Time |
|---|---|---|
| GPIB-ENET/1000 | Yes | No |
| GPIB-USB-HS | Yes | No |
| GPIB-USB-HS+ | Yes | No |
| NI ExpressCard-GPIB2 | Yes | No |
| NI PCIe-GPIB | Yes | Yes |
| NI PCIe-GPIB+ | Yes | Yes1 |
| NI PCI-GPIB | Yes | Yes |
| NI PCI-GPIB+ | Yes | Yes1 |
| NI PCI-GPIB/LP | Yes | Yes |
| NI PCI-8232 | Yes | Yes |
| NI PMC-GPIB | Yes | Yes |
| NI PXI controller with built-in GPIB | Yes | Yes |
| NI PXI-GPIB | Yes | Yes |
| NI PXI-8232 | Yes | Yes |
1Analyzer functionality is not supported.
2 This hardware is end-of-life and not recommended for new designs.
You can install all of your LabVIEW products—including NI-488.2—using the LabVIEW Platform media.
To request additional LabVIEW Platform media, refer to the NI website.
Note
NI automates LabVIEW NXG installation using NI Package Manager. Visit ni.com/info and enter the Info Code NIPMDownload to download NI Package Manager. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.
Visit ni.com/security to view and subscribe to receive security notifications about NI products. For information about critical updates from NI, refer to Available Critical and Security Updates for NI Software.
You can access the software and documentation known issues list online. Refer to the NI website for an up-to-date list of known issues in NI-488.2.
Added support for Windows Server 2019
Removed support for Windows Vista/XP/7/8.x, Windows Server 2003/2008/2012, or any 32-bit Windows operating systems.
Removed support for DOS and Win16 applications which only worked on 32-bit Windows operating systems.
Improved GPIB-ENET/1000 support for LabVIEW NXG 5.0.
Improved GPIB-ENET/1000 support for LabVIEW NXG 4.0.
Added support for 32-bit Package Manager and deprecated the previous install process.
730438: In some rare cases, the GPIB Hardware Enumeration Service does not start after rebooting the system, which could cause the GPIB hardware not to be usable.
373478: In a multicontroller application, all controllers used in the application would report EPWR error if one of the controllers lost power resulting in an EPWR error.
568289: Removing GPIB USB controllers from the system while saving configuration in MAX resulted the GPIB USB controllers not being removed in MAX.
670170: A hang might occur during an I/O operation if a Service Request is stuck when Autopolling is happening.
647895: As a result of an issue introduced in a previous version of NI-488.2, ibnotify for a Service Request may cause a hang when the service request event occurs.
Support for HLK signing for Windows 10.
Support for Borland C dropped.
582112: In rare cases, connecting a GPIB-USB-HS+ interface to a system could cause the computer to crash.
569142: Installer indicates that NI I/O Trace is required for NI-488.2.
433395: Extra delay on ibwait and ibstop was removed for GPIB Ethernet-based hardware.
538997: An NI4882 API call in a multithreaded or multiprocess application results in an unexpected error due to unprotected API calls when opening a device handle.
542306: When an application exits while there is asynchronous IO pending on ENET interfaces, the application crashes.
557236: GPIB Analyzer crashes when exporting a large capture to a text file.
547340: GPIB ports may not be reported in NI MAX, Web Configuration, and System Configuration API with NI-488.2 15.0.0.
The configuration experience in Measurement & Automation Explorer (MAX) has been updated to improve consistency with other NI products. Significant changes include:
GPIB interfaces are now fully configurable through the NI Web Configuration interface. Self-Test has also been added.
The NI-488.2 Troubleshooting Utility has been removed. GPIB interfaces may be tested using the Self-Test feature in Measurement & Automation Explorer, or programmatically through the System Configuration API.
506688: The NI-488.2 driver is unable to recover from certain types of USB errors. These errors may occur on some systems when other USB devices are added or removed from the system while a GPIB operation is in progress. In prior versions of NI-488.2, this could lead to a hang in the process using a USB-to-GPIB interface. It could also result in a hang or blue screen error on system shutdown. This scenario now results in an EDVR error when an unrecoverable USB error occurs. To restore operation, the USB connection to the GPIB interface should be removed and reinserted, and the GPIB handle should be closed and re-opened.
518983: As a result of an issue introduced in NI-488.2 14.0, GPIB-USB-B or GPIB-USB-HS I/O bus communication can hang until the handle to the GPIB interface is closed when all of the following conditions are true:
507376: Installer hang might occur during installation of NI software on systems with NI-488.2 14.0 already installed.
478063: GPIB-USB-HS+ might become unresponsive upon rebooting in a virtual machine.
121091: Calling ibonl when a board level ibwait is in progress could result in application crash.
121181: A deadlock might occur when attempting to use a board handle with pending ibonl call on another thread.
476357: GPIB Ethernet Wizard can incorrectly add GPIB-ENET/1000 with hostname even if it is not reachable.
476487: GPIB Ethernet Wizard icon does not appear on Windows task bar.
This release adds support for the GPIB-USB-HS+ GPIB controller and Analyzer. Along with this, the NI GPIB Analyzer utility has undergone changes to allow it to work with the new analyzer hardware. The NI GPIB Analyzer utility allows simultaneous use of multiple GPIB-USB-HS+ analyzers, along with up to one non-USB GPIB analyzer.
This release adds support for Windows Server 2012 R2. Refer to the Supported Hardware section for the list of supported hardware.
The integer types used in the NI4882 API (ni4882.h) have been updated. All uses of unsigned long have been replaced with unsigned int. These types are functionally identical with all supported compilers, and this change improves the portability of 64-bit GPIB applications to other platforms. Users of ibnotify will need to update the function prototypes for callback functions. In most other cases applications will compile cleanly. This change is fully binary-compatible with applications built against previous versions of NI-488.2 and does not impact users of the GPIB-32 API (ni488.h).
NI-488.2 for Windows is now available in a smaller Runtime form. The NI-488.2 Runtime is a minimal installation which does not include many of the utilities and supporting software included with the full NI-488.2 distribution. When building installers from LabVIEW or other NI development environments, you will now have the option of including this smaller subset of NI-488.2 in your distribution.
319093: Attempting to bring a non-existent device online after setting the IbcSendLLO board configuration option causes an ENOL error instead of EBUS. This problem impacted all USB based GPIB interfaces. This has been fixed.
122997: The EOIP status bit could remain set incorrectly if an ibwrta or ibrda call returned an EDVR error.
171688: An ibnotify callback could fail to be triggered by END if the notify condition included END but not CMPL.
205182: Asynchronous transfers could sometimes report EABO even though the transfer completed successfully.
372832: A callback from ibnotify might not be invoked after an asynchronous transfer was completed if the notify mask only contained END.
374822: Calling ibonl while ibnotify is pending could cause the process to crash under some circumstances.
380705: Aborting an ibrda very quickly after starting it could allow a PCI-based GPIB interface to receive data when addressed as a listener, without a read in progress. This data was lost, and could not be recovered.
404267: In some situations, the GPIB-ENET/1000 could hang while performing asynchronous transfers. This included fixes in both the NI-488.2 driver and the GPIB-ENET/1000 firmware. Users of the GPIB-ENET/1000 should update the GPIB-ENET/1000 firmware to version 1.1.0 to receive the full benefit of this fix.
405414: In some cases the DCAS bit was not correctly cleared after being reported, causing it to be reported with subsequent calls.
418661: In some situations, when an ibnotify callback function was triggered due to the completion of an asynchronous transfer, the ibcnt and ibcntl variables would be incorrect.
425931: Calling ibstop with an asynchronous operation in progress would sometimes not report an EABO error as expected.
464114: When using a GPIB-USB-B controller, the call immediately following an ibstop call could be incorrectly aborted.
463966: Severe performance degradation when performing large writes to GPIB-USB-HS hardware through USB 3.0 ports on Windows 7.
332479: On GPIB-USB-B and GPIB-USB-HS controllers, the first I/O operation after device insertion could be terminated prematurely.
240000: On GPIB-USB-B and GPIB-USB-HS controllers, ibwait and ibnotify could fail to detect the CIC, LACS, and TACS bits.
191044: The GPIB Analyzer did not automatically append the correct file extension when saving a capture.
87073: The GPIB Analyzer did not prompt to save if the application is closed while capturing data.
Refer to the NI-488.2 Help, accessible by selecting National Instruments»NI-488.2»GPIB Help from the Windows menu bar.
The following sections detail considerations for using LabVIEW NXG with NI-488.2.
Software support for LabVIEW NXG differs in the following ways:
Support differs for the following devices in LabVIEW NXG:
View context help in LabVIEW by pressing <Ctrl-H> and hovering over an object.
Search for items using the search bar in the upper right corner of the LabVIEW window. You can also view context help for the search results.
Additional documentation is available online at ni.com/manuals.
Launch LabVIEW and click the Learning tab.
LabVIEW lessons are located in the Lessons tab, and LabVIEW Examples are located in the Examples tab. Follow the instructions in the lessons and examples.
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.
For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager manual.
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.
NI-488.2 no longer supports Windows Vista/XP/7/8.x, Windows Server 2003/2008/2012, or any 32-bit Windows operating system. Versions of this product that ship after May 1, 2021, may not install or execute correctly on these operating systems. For detailed information about NI operating system support, visit https://www.ni.com/r/win32bitsupport.
NI Software will drop support for Phar Lap ETS Real-Time Operating System starting in 2022. Versions of this product that ship after May 1, 2022, may not install or execute correctly on this operating system. For high-level information on the support roadmap for Phar Lap and its replacement, NI Linux Real-Time, visit ni.com/r/xf35k1. To find out what hardware is supported on PXI controllers running NI Linux Real-Time, visit ni.com/r/b7g5wi.
Copyright
© 1995–2021 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
375742K-01