This file contains installation instructions and compatibility information for FlexRIO.
You can find more release information on ni.com.
FlexRIO 21.8 supports the following operating systems:
Note Refer to Unsupported Windows Operating Systems for more information about support for Microsoft Windows OSes.
Note FlexRIO no longer supports Windows Vista/XP/7/8.x, Windows Server 2003/2008/2012, or any 32-bit Windows operating system. FlexRIO will not install or run on an unsupported OS. You cannot deploy or distribute applications that use FlexRIO to an unsupported OS. Additionally, after installing FlexRIO, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.
For more information about the changes to our OS support, visit https://www.ni.com/r/win32bitsupport.
Note: FlexRIO 21.8 does not support Windows Server non-R2 editions.
NI recommends that you have the most recent service pack for your operating system installed.
FlexRIO 21.8 supports the following application software versions, including service packs.
|Application Software||Versions Supported by FlexRIO 21.8|
|LabVIEW||2018, 2019, 2020, and 2021|
|LabVIEW Real-Time||2018, 2019, 2020, and 2021|
|LabVIEW FPGA||2018, 2019, 2020, and 2021|
This product no longer supports LabVIEW NXG. Refer to LabVIEW NXG on ni.com for more information about LabVIEW NXG Life-Cycle Dates and driver version support.
Note: Applications that run on an RT target require 128 MB of memory or more.ni.com/downloads. NI software includes NI Package Manager to handle the installation. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.
Visit ni.com/security to view and subscribe to receive security notifications about NI products. For information about critical updates from NI, refer to Available Critical and Security Updates for NI Software.
The tables below list the hardware supported by FlexRIO 21.8 and specify LabVIEW support for that hardware.
|FlexRIO with Integrated I/O||LabVIEW Version Requirements|
|FlexRIO FPD-Link Interface Modules|
|FlexRIO GMSL Interface Modules|
|FlexRIO High-Speed Serial Modules|
|PXIe-6594||LabVIEW 2020 or 2021|
|PXIe-6593||LabVIEW 2019, 2020, or 2021|
|FlexRIO Coprocessor Modules|
|FlexRIO Digitizer Modules|
|PXIe-5763||LabVIEW 2018, 2019, 2020, or 2021|
|PXIe-5764||LabVIEW 2018, 2019, 2020, or 2021|
|PXIe-5775||LabVIEW 2018, 2019, 2020, or 2021|
|PXIe-5774||LabVIEW 2018, 2019, 2020, or 2021|
|PCIe-5774||LabVIEW 2018, 2019, 2020, or 2021|
|PCIe-5763||LabVIEW 2018, 2019, 2020, or 2021|
|PCIe-5764||LabVIEW 2018, 2019, 2020, or 2021|
|PCIe-5775||LabVIEW 2018, 2019, 2020, or 2021|
|FlexRIO Signal Generator Modules|
|PXIe-5745||LabVIEW 2018, 2019, 2020, or 2021|
|FlexRIO IF Transceiver Modules|
|PXIe-5785||LabVIEW 2018, 2019, 2020, or 2021|
|PCIe-5785||LabVIEW 2018, 2019, 2020, or 2021|
|FlexRIO Digital Modules|
|PXIe-6569||LabVIEW 2020 or 2021|
|FlexRIO with Modular I/O||LabVIEW Version Requisites|
|Controllers for FlexRIO|
|FlexRIO FPGA Modules|
|FlexRIO Adapter Modules|
|NI 5731||LabVIEW 2020 or 2021|
|NI 5732||LabVIEW 2020 or 2021|
|NI 5733||LabVIEW 2020 or 2021|
|NI 5734||LabVIEW 2020 or 2021|
|NI 5741||LabVIEW 2020 or 2021|
|NI 5742||LabVIEW 2020 or 2021|
|NI 5751/5751B||LabVIEW 2020 or 2021|
|NI 5752/5752B||LabVIEW 2020 or 2021|
|NI 5753||LabVIEW 2020 or 2021|
|NI 5761||LabVIEW 2020 or 2021|
|NI 5762||LabVIEW 2020 or 2021|
|NI 5771||LabVIEW 2020 or 2021|
|NI 5772||LabVIEW 2020 or 2021|
|NI 5781||LabVIEW 2020 or 2021|
|NI 5782||LabVIEW 2020 or 2021|
|NI 5783||LabVIEW 2020 or 2021|
|NI 5791||LabVIEW 2020 or 2021|
|NI 5792||LabVIEW 2020 or 2021|
|NI 5793||LabVIEW 2020 or 2021|
|NI 6581/6581B||LabVIEW 2020 or 2021|
|NI 6583||LabVIEW 2020 or 2021|
|NI 6584||LabVIEW 2020 or 2021|
|NI 6585/6585B||LabVIEW 2020 or 2021|
|NI 6587||LabVIEW 2020 or 2021|
|NI 6589||LabVIEW 2020 or 2021|
For detailed information about LabVIEW capabilities for FlexRIO hardware, access the FlexRIO Help from Start>>All Programs>>National Instruments>>FlexRIO Help.
In LabVIEW, select Help»Find Examples to launch the NI Example Finder. Use one of the following methods to locate FlexRIO examples:
Note:To access FlexRIO with Integrated I/O examples, open Hardware Input and Output»FlexRIO»Integrated IO»Getting Started»Getting Started FlexRIO Integrated IO.vi to view the FlexRIO with Integrated IO Project Creator.
Note: FlexRIO examples are classified by keyword, so you can also use the Search tab to search for a particular device or measurement function.
To access more FlexRIO examples and the join the FlexRIO community, visit ni.com/examples and search by category for "FlexRIO."
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.
For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager manual.
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, refer to NI Product Compatibility for Microsoft Windows 10.
©2008–2022 National Instruments Corporation. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.