650x/651x/652x Models : DAQ Digital I/O Cable and Accessory Compatibility Guide

Overview

Use this guide to match your NI Digital I/O (DIO) 65xx Models PCI, PCI Express (PCIe), PXI, or PXI Express (PXIe), or USB DAQ product with a compatible cable and accessory to meet the needs of your application, replacing or expanding your current configuration, or verifying that existing parts can be used in a different configuration.

NI Digital I/O (DIO) 65xx Models allow for digital input and output through a variety of connectivity options.

Note: This guide is for standard Digital I/O NI 650x, 651x, and 652x models listed below. Other NI 65xx Digital Instruments models are covered in a separate guide.

This page is part of the NI DAQ Multifunction I/O Cable and Accessory Compatibility Guide.

Contents

How to Use this Guide

It is important to work through this guide sequentially to identify and then pair up your device with compatible cables and accessories. To do this, complete the following steps:

  1. Find your module or device in the Device List.
  2. Use the Cable and Accessory Compatibility Tables to identify your device.
  3. Check the Known Limitations and Issues List for any known limitations you may encounter.

Note: Using the page search functionality in your browser to locate your model may speed up this process, typically CTRL+F on Windows or ⌘+F on OS X.

Note: This guide does not cover USB-65xx DAQ OEM models, refer to your 65xx OEM User Guide for wiring and connection considerations.

Device List

Begin by using the following tables to locate your device or module. Once found, note your connector type, pin count, and any other notes for reference. Next, move to the Cable and Accessory Compatibility Tables.

Important Note: "Group" used in this context is solely to categorize devices together that use the same cables and accessories. It does not necessarily indicate similar functionality, specifications, or other commonalities between the devices.

 

Group 1: 50-Pin Digital I/O 65xx Models Device

Identify your 50-pin IDC device, then click to jump to the compatibility table.

 

 

Group 2: 100-Pin Digital I/O 65xx Models Device And Module

Identify your 100-pin SCSI 0.050 D-Type device, then click to jump to the compatibility table.

 

 

Group 3: 37-Pin Digital I/O 65xx Models Device And Module

Identify your 37-pin DSUB device, then click to jump to the compatibility table.

 

 

Group 4: Screw Terminal Digital I/O 65xx Models USB Device

Note: USB Digital I/O 65xx devices connect to your PC through a Hi-Speed USB 2.0 cable with USB Type A and Type B connectors on opposite ends. This cable is included in the original shipping kit of your USB Digital I/O 65xx device.

Identify your USB device, then click to jump to the compatibility table.

 

 

Cable and Accessory Compatibility Tables

Find the compatibility table that matches the pin count and connector type of your device. If you have questions on terminology, refer to the Glossary. After you have identified the cable and accessory options for your device from this section, move to the Known Limitations and Issues List.

Note: To help keep the size down of the compatibility tables, the terms terminal block and connector block are used interchangeably.

Group 1: 50-Pin IDC 65xx Models Device

Use this table to identify compatible IDC cables and accessories.

 

Click here to jump to the Known Limitations and Issues List.

Group 2: SCSI 0.050 D-Type 100-Pin Digital I/O 65xx Models Device or Module

Use this table to identify compatible SCSI 0.050 D-Type cables and accessories.

 

Click here to jump to the Known Limitations and Issues List.

Group 3: DSUB 37-Pin Digital I/O 65xx Models Device And Module

Use this table to identify compatible DSUB cables and accessories.

 

Click here to jump to the Known Limitations and Issues List.

Group 4: Screw Terminal Digital I/O 65xx Models USB Device

Use this table to identify connectivity options for screw terminal devices.

 

Known Limitations and Issues List

This section is important to review because not every cable and accessory combination allows access to the full functionality of your NI DAQ Digital I/O 65xx (formerly DIO) device or module. This list contains notes about known limitations when using certain combinations of DAQ cables and accessories. If your device or cable is not listed in this section, there are no known exceptions for it.

Devices/Modules:

Review this table to identify potential limitations and known issues with your device or module.
ModelNote
PXI-6508
PCI/PCIe/PXI-6509
USB-6509
PCI/PXI-6511
PCI/PXI-6512
PCI-6513
PCI/PXI-6514
PCI/PXI-6515
PCI/PXI-6528
PXI-6529
PCI-DIO-96
To enable connection on all lines of the device/module with the R1005050 cable, you must connect to two 50-pin connector blocks. The CB-100 kit contains two CB-50 connector blocks and a R1005050 cable.
PCI-6503
PXI-6508
PCI-DIO-96
Refer to the PCI-DIO-96/PXI-6508/PCI-6503 User Manual for more information about Custom Cabling.
PCI/PXI-6521The NI 6521 must be used with special keyed cables and accessories.



Glossary

Review the DAQ Cable and Accessory Guides for more information about this terminology and other descriptors.

  • 0.050 D-Type - Industry standard SCSI connector standard featuring 0.050 pin spacing that is used in 50, 68 and 100-position DAQ cable and accessory connections. Click here for an example (68-pin).
  • D-Sub (DSUB) - Industry standard D-Sub connector that is used on 37-pin DAQ cable and accessory connections. Click here for an example.
  • Insulation Displacement Connector (IDC) - Also known as insulation-piercing contact (IPC). A type of cable connector that allows multiple conductor connections to a connector without soldering. Click here for an example.
  • Ribbon Cable - A low-cost unshielded cable solution. Click here for an example.
  • Shielded Cable - A high performance cable solution that offers noise reduction through shielded conductors. Click here for an example.
  • Shielded Terminal Block or Connector Block - A high performance accessory solution offering very low-noise signal termination through shielding. Click here for an example.
  • Unshielded Terminal Block or Connector Block - An alternative low cost accessory solution that does not offer shielding. Click here for an example.

 

Ordering Information

When purchasing an NI DAQ Digital I/O 65xx Model (formerly DIO) device or module, for ease of use, the cables and accessories are listed on the product selection page. To begin browsing NI DAQ devices and modules, visit ni.com/daq.

You may also purchase your cables and accessories separately. 

DeviceCablesAccessories
ShieldedUnshieldedCustom Connectivity
Screw Terminal BlockBNC Terminal BlockTerminal Block - PXI MountedSCC Screw Terminal blockSCC CarrierScrew Terminal Block - DIN Rail MountScrew Terminal Block
6503NB1 (Low Cost)
P/N 180524-05
N/AN/AN/AN/AN/AN/A

CB-50 
P/N 776164-90 

CB-50LP
P/N 777101-01

 N/A
DeviceCablesAccessories
ShieldedUnshieldedCustom Connectivity
Screw Terminal BlockBNC Terminal BlockTerminal Block - PXI MountedSCC Screw Terminal blockSCC CarrierScrew Terminal Block - DIN Rail MountScrew Terminal Block
6508, 6509, 6511, 6512, 6513, 6514, 6515, 6527, 6528, 6529, PCI-DIO-96

SH100M-100M Flex

(Recommended
Shielded)
P/N 185095-01 (1 m)

SCB-100A 

P/N 785024-01

N/A

N/A

N/A

N/A

N/A

N/A

N/A

R10050502 (Unshielded, conversion to two 50-pin connectors)
P/N 182762-02 (2 m)

N/A

N/A

N/A

N/A

N/A

N/A

CB-502
P/N 776164-90

CB-50LP
P/N 777101-01

N/A

The SH100M-100M Flex cable was formerly named SH100-100F.
2 The CB-100 Series kit consists of one R1005050 cable and two CB-50 connector blocks.

DeviceCablesAccessories
ShieldedUnshieldedCustom Connectivity
Screw Terminal BlockBNC Terminal BlockTerminal Block - PXI MountedSCC Screw Terminal blockSCC CarrierScrew Terminal Block - DIN Rail MountScrew Terminal Block

6510, 6516, 6517, 6518, 6519, 6520

SH37F-37M (Recommended, Shielded)
P/N 778621-02 (2 m)

R37F-37M (Low Cost)
P/N 779195-01 (1 m)
P/N 779195-0R25 (0.25 m)
P/N 779195-0R5 (0.5 m)

N/AN/AN/AN/AN/A

CB-37FH
P/N 778676-01 (37-pin spring terminal)
P/N 778673-01 (37-DSUB to screw terminal)

CB-37FV
P/N 778685-01 (37-pin spring terminal)
P/N 778672-01 (37-DSUB to screw terminal)

CB-37F-HVD
P/N 779491-01

CB-37F-LP
P/N 779353-01

TB-37F-37CP
P/N 779185-01

TB-37F-37SC
P/N 779184-01

SH37F-P-4 (Shielded, 
Pigtail Ends)
P/N 778620-04 (4 m)

N/AN/AN/AN/AN/AN/AN/AN/A

6521

SH37F-37M (Recommended, Shielded)
R37F-37M (Low Cost)

N/AN/A

TB-26211
P/N 779444-01

N/AN/A

CB-37F-HVD
P/N 779491-01

N/A

TB-37F-37CP
P/N 779185-01

SH37F-P-4 (Shielded, 
Pigtail Ends)

N/AN/AN/AN/AN/AN/AN/AN/A

 

TB-2621 can only be attached directly to PXI modules front connector, and does not require a cable.

ModelConnector TypeNotes
PCI-6510DSUBIsolated device.
PCI-6516DSUBIsolated device.
PCI-6517DSUBIsolated device.
PCI-6518DSUBIsolated device.
PCI-6519DSUBIsolated device.
PCI-6520DSUBIsolated device.
PCI-6521DSUBIsolated device. Refer to the Known Limitations and Issues List
PXI-6521DSUBIsolated device. Refer to the Known Limitations and Issues List
ModelConnector TypeNotes
USB-6501N/AScrew Terminal model
USB-6525
N/AScrew Terminal model
DeviceCablesAccessories

USB-6501/6525 Screw Terminal Model Connectivity

Use shielded or unshielded wires to connect directly to your USB device's screw terminal connectors. Refer to the specifications document for your device for the screw terminal wire gauge specification.

USB-6501/6525 screw terminal devices feature screw terminal connectivity directly on the device, and do not require an accessory for interfacing signals.

Note: Does not feature a mass termination connector to connect to other DAQ accessories.

 

Was this information helpful?

Yes

No