Software-Related Operation Modes下载PDF选定部分选定部分和子部分整个手册更新时间2023-12-28阅读时长1分钟PAtools e-Powertrain软件套件用户手册 Software-Related Operation Modes The safety-related operation mode provides the following different software-related operation modes: Automatic ModeIn automatic mode, the test cycles are automatically driven by the system either until the test run is finished or until it is interrupted. You can also pause and resume the test run.Manual ModeManual mode allows you to select the control mode, the setpoint settings, and the gradients individually. The gradients adjust the current setpoint values to the new setpoint settings by a ramp function.Remote Control Mode (Optional)There is an optional remote control interface to which external systems (e.g., HIL systems or line servers) can be connected.
Software-Related Operation Modes The safety-related operation mode provides the following different software-related operation modes: Automatic ModeIn automatic mode, the test cycles are automatically driven by the system either until the test run is finished or until it is interrupted. You can also pause and resume the test run.Manual ModeManual mode allows you to select the control mode, the setpoint settings, and the gradients individually. The gradients adjust the current setpoint values to the new setpoint settings by a ramp function.Remote Control Mode (Optional)There is an optional remote control interface to which external systems (e.g., HIL systems or line servers) can be connected.
Software-Related Operation Modes The safety-related operation mode provides the following different software-related operation modes: Automatic ModeIn automatic mode, the test cycles are automatically driven by the system either until the test run is finished or until it is interrupted. You can also pause and resume the test run.Manual ModeManual mode allows you to select the control mode, the setpoint settings, and the gradients individually. The gradients adjust the current setpoint values to the new setpoint settings by a ramp function.Remote Control Mode (Optional)There is an optional remote control interface to which external systems (e.g., HIL systems or line servers) can be connected.