Programming Reference下载PDF选定部分选定部分和子部分整个手册更新时间2025-07-18阅读时长1分钟NI-USRP流程指南 This section provides reference and programming information for the NI-USRP driver. NI-USRP Instrument Driver Programming FlowThe NI-USRP can transmit and receive signals with distinct programming flow for each.MIMO Synchronization for USRP-2920/2921/2922/2930/2932 DevicesThis section describes how to set up your USRP-2920/2921/2922/2930/2932 devices for multiple input, multiple output (MIMO) synchronization. NI-USRP devices support MIMO synchronization from 2 × 2 to 8 × 8 antenna configurations. You can combine multiple USRP devices to form a phase-coherent antenna array for transmission and reception.Scoping Rules for NI-USRPAttributes, which are typically called properties in LabVIEW, serve as a base for parameters. NI-USRP contains high-level VIs that set most of the instrument properties. Some properties are not accessible through the high-level VIs. The values for these properties must be set using the niUSRP Property Node.
This section provides reference and programming information for the NI-USRP driver. NI-USRP Instrument Driver Programming FlowThe NI-USRP can transmit and receive signals with distinct programming flow for each.MIMO Synchronization for USRP-2920/2921/2922/2930/2932 DevicesThis section describes how to set up your USRP-2920/2921/2922/2930/2932 devices for multiple input, multiple output (MIMO) synchronization. NI-USRP devices support MIMO synchronization from 2 × 2 to 8 × 8 antenna configurations. You can combine multiple USRP devices to form a phase-coherent antenna array for transmission and reception.Scoping Rules for NI-USRPAttributes, which are typically called properties in LabVIEW, serve as a base for parameters. NI-USRP contains high-level VIs that set most of the instrument properties. Some properties are not accessible through the high-level VIs. The values for these properties must be set using the niUSRP Property Node.
This section provides reference and programming information for the NI-USRP driver. NI-USRP Instrument Driver Programming FlowThe NI-USRP can transmit and receive signals with distinct programming flow for each.MIMO Synchronization for USRP-2920/2921/2922/2930/2932 DevicesThis section describes how to set up your USRP-2920/2921/2922/2930/2932 devices for multiple input, multiple output (MIMO) synchronization. NI-USRP devices support MIMO synchronization from 2 × 2 to 8 × 8 antenna configurations. You can combine multiple USRP devices to form a phase-coherent antenna array for transmission and reception.Scoping Rules for NI-USRPAttributes, which are typically called properties in LabVIEW, serve as a base for parameters. NI-USRP contains high-level VIs that set most of the instrument properties. Some properties are not accessible through the high-level VIs. The values for these properties must be set using the niUSRP Property Node.