要为下列NI驱动程序安装指定的程序包，请使用Linux发行版的Package Manager。

表 1. Linux发行版支持的NI驱动程序包
驱动程序 必需程序包 可选程序包
NI-488.2 ni-488.2 libni4882-devel

ni-488.2-iotrace-support
Automotive Diagnostic Command Set工具包 ni-adcs ni-adcs-labview-20xy-supportlib

nidiagcs-devel
NI-DAQmx ni-daqmx ni-daqmx-labview-20xy-support

ni-daqmx-labview-supportlib

nidaqmx-devel
NI-DCPower ni-dcpower ni-dcpower-daqmx

ni-dcpower-labview-20xy-support

ni-dcpower-labview-support

ni-dcpower-devel
NI-DMM ni-dmm ni-dmm-daqmx

ni-dmm-labview-20xy-support

ni-dmm-labview-support

ni-dmm-devel
ECU Measurement and Calibration工具包 ni-ecumc ni-ecumc-labview-20xy-support

libniemcc-devel
NI-FGEN ni-fgen ni-fgen-daqmx

ni-fgen-devel

ni-fgen-labview-support

ni-fgen-labview-20xy-support
FlexRIO ni-flexrio ni-flexrio-795x

ni-flexrio-796x

ni-flexrio-797x

libniflexrioapi-devel

ni-flexrio-modulario-libs-devel
硬件配置工具 ni-hwcfg-utility —
PXI Platform Services ni-pxiplatformservices ni-pxiplatformservices-labview-20xy-support

ni-pxiplatformservices-labview-support

ni-pxiplatformservices-devel
NI-RIO ni-fpga-interface ni-rio-mxie
NI R系列 ni-rseries —
NI-RFSA ni-rfsa ni-rfsa-daqmx

ni-rfsa-labview-20xy-support

ni-rfsa-devel
NI-RFSG ni-rfsg ni-rfsg-daqmx

ni-rfsg-labview-20xy-support

ni-rfsg-devel
NI-SCOPE ni-scope ni-scope-daqmx

ni-scope-labview-20xy-support

ni-scope-labview-support

ni-scope-devel
NI-Serial ni-serial —
NI-SWITCH ni-switch ni-switch-daqmx

ni-switch-daqmx-config

ni-switch-labview-support

ni-switch-labview-20xy-examples

ni-switch-devel
NI-Sync ni-sync ni-sync-devel

ni-sync-labview-20xy-support

ni-sync-labview-support
系统配置 ni-syscfg-runtime ni-syscfg-labview-20xy-support

ni-syscfg-labview-support

ni-iotrace

ni-syscfg-devel
NI-VISA ni-visa ni-visa-labview-20xy-support

ni-visa-labview-support

ni-visa-devel
NI-XNET ni-xnet ni-xnet-labview-20xy-support

libnixnet-devel
NI RIO支持通过FPGA接口API连接至远程RIO设备，如CompactRIO、单板RIO和以太网RIO。

以下是可选程序包的类别：

  • LabVIEW支持包—这些程序包将驱动程序API安装到LabVIEW。LabVIEW支持包的包名称中包含驱动程序和“labview”。LabVIEW支持包有两种类型：
    • 特定版本的LabVIEW支持包－列出了年份的旧式LabVIEW支持包。仅当LabVIEW支持包与当前使用的LabVIEW版本一致时，才使用该支持包。
    • 与版本无关的LabVIEW支持包－新式LabVIEW支持包。如未找到与当前使用LabVIEW版本一致的LabVIEW支持包，可使用该支持包。
  • 开发包—这些程序包会安装使用驱动程序编译代码所需的头文件，但执行在其他地方编译的代码不需要这些文件。通常，仅在开发机器上需要安装开发包，而在部署系统中不一定需要。开发程序包的名称以“-devel”结尾。
  • Driver-DAQmx支持包—以下程序包都有一些硬件设备，它们有基于NI-DAQmx构建的单独驱动程序。这些程序包用作特定硬件设备的顶层驱动程序程序包。
    • NI-DCPower
    • NI-DMM
    • NI-FGEN
    • NI-RFSA
    • NI-RFSG
    • NI-SCOPE
    • NI-SWITCH