Use the NI-SCOPE VIs to develop applications for your NI high-speed digitizer.

The following tables show an overview of the VIs and subpalettes on the main NI-SCOPE palette.

niScope Initialize VI
Performs the following initialization actions:
niScope Configure Vertical VI
Configures the most commonly configured properties of the digitizer vertical subsystem, such as the range, offset, coupling, probe attenuation, and the channel name.
niScope Configure Horizontal Timing VI
Configures the common properties of the horizontal subsystem for a single record or multirecord acquisition, such as minimum sample rate and acquisition size.
niScope Configure Trigger (poly) VI
Configures the digitizer for different types of triggering.
niScope Read (poly) VI
Initiates an acquisition, waits for it to complete, and acquires data.
niScope Close VI
Performs the following actions:
niScope Initialize With Options VI
Performs the following initialization actions:
Configuration
Use the NI-SCOPE Configuration VIs to set up and transfer the parameters of your acquisition, or use Auto Setup to automatically configure device settings.
Timing
Use the NI-SCOPE Timing VIs to configure common timing properties for your digitizer.
Triggering
Use the NI-SCOPE Triggering VIs to configure the trigger properties.
Acquisition
Use the NI-SCOPE Acquisition VIs to control your data acquisition and to retrieve data from your device.
Calibration
Use the NI-SCOPE Calibration VIs to self-calibrate your digitizer and to access lower-level external calibration functions.
niScope Property Node VI
The niScope Property Node is used to set, get, or check properties.
Measurements
Use the NI-SCOPE Measurements VIs to perform waveform measurements, including scalar and array measurements.
Utility Functions
Use the NI-SCOPE Utility VIs to perform various tasks such as resetting the digitizer and returning the revision numbers of the driver and the instrument firmware.

NI-SCOPE LabVIEW VI Reference

Log in to get a better experience