Use the NI-SCOPE Timing VIs to configure common timing properties for your digitizer.

niScope Configure Clock VI
Configures the properties for synchronizing the digitizer to an external clock or sending the digitizer's clock output to be used as a synchronizing clock for other devices.
niScope Export Signal VI
Configures the digitizer to generate a signal that other devices can detect when configured for digital triggering or sharing clocks. The signal parameter specifies what condition causes the digitizer to generate the signal. The output terminal parameter specifies where to send the signal on the hardware (such as a PFI connector or RTSI line).
niScope Adjust Sample Clock Relative Delay VI
Applies offset, in seconds, to the sample clock relative to the reference clock when using the onboard clock.
Actual Values
Use the VIs on the Actual Values palette to configure actual sample mode, record length, and sample rate.
niScope Configure Horizontal Timing VI
Configures the common properties of the horizontal subsystem for a single record or multirecord acquisition, such as minimum sample rate and acquisition size.

Parent topic: NI-SCOPE

NI-SCOPE LabVIEW VI Reference

Log in to get a better experience