Configures the band class used for the measurement.


icon

Inputs/Outputs

  • cstr.png Selector String —

    Selector String specifies a selector string comprising of the signal name. If you do not specify the signal name, the default signal instance is used. The default value is "" (empty string).

    Examples:

    ""

    "signal::sig1"

    You can use the RFmxCDMA2k Build Signal String VI to build the selector string.

  • cgenclassrntag.png Instrument Handle In —

    Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

  • ci32.png Band Class —

    Band Class specifies the band in which the channel is located as defined in Section: 1.5, Table 1.5-1: Band Class List, of the 3GPP2 C.S0057-F specification v1.0. The default value is 0.

    0 (0) Specifies the 800 MHz cellular band.
    1 (1) Specifies the 1.8 GHz to 2.0 GHz PCS band.
    2 (2) Specifies the 872 MHz to 960 MHz TACS band.
    3 (3) Specifies the 832 MHz to 925 MHZ JTACS band.
    4 (4) Specifies the 1.75 GHz to 1.87 GHz Korean PCS band.
    5 (5) Specifies the 450 MHz NMT band.
    6 (6) Specifies the 2 GHz IMT-2000 band.
    7 (7) Specifies the upper 700 MHz PARMR band.
    8 (8) Specifies the 1,800 MHz to 2 GHz band.
    9 (9) Specifies the 900 MHz band.
    10 (10) Specifies the secondary 1,800 MHz band.
    11 (11) Specifies the 400 MHz European PAMR band.
    12 (12) Specifies the 800 MHz PAMR band.
    14 (14) Specifies the US PCS 1.9 GHz band.
    15 (15) Specifies the AWS band.
  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • igenclassrntag.png Instrument Handle Out —

    Instrument Handle Out passes a reference to your RFmx session to the next VI.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.