Configures the sweep time.


icon

Inputs/Outputs

  • cstr.png Selector String —

    Selector String specifies a selector string comprising of the signal name. If you do not specify the signal name, the default signal instance is used. The default value is "" (empty string).

    Examples:

    ""

    "signal::sig1"

    You can use the RFmxCDMA2k Build Signal String VI to build the selector string.

  • cgenclassrntag.png Instrument Handle In —

    Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

  • ci32.png Sweep Time Auto —

    Sweep Time Auto specifies whether the measurement computes the sweep time.

    The default value is True .

    False (0) The measurement uses the sweep time that you specify using the Sweep Time Interval parameter.
    True (1) The measurement uses the default sweep time of 0.001667 seconds.

    Refer to the RBW and Sweep Time section in the CHP topic for more information about RBW and sweep time.

  • cdbl.png Sweep Time Interval (s) —

    Sweep Time Interval specifies the sweep time if you set the Sweep Time Auto parameter to False. This value is expressed in seconds.

    The default value is 0.00167 seconds.

  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • igenclassrntag.png Instrument Handle Out —

    Instrument Handle Out passes a reference to your RFmx session to the next VI.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.