Configures the spreading factor, spreading code, modulation type, and branch of the channel to be measured.


icon

Inputs/Outputs

  • cstr.png Selector String —

    Selector String specifies a selector string comprising of the signal name. If you do not specify the signal name, the default signal instance is used. The default value is "" (empty string).

    Examples:

    ""

    "signal::sig1"

    You can use the RFmxCDMA2k Build Signal String VI to build the selector string.

  • cgenclassrntag.png Instrument Handle In —

    Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

  • ci32.png Walsh Code Length —

    Walsh Code Length specifies the Walsh code length of a channel subject to channel specific analysis. The default value is 64. The valid values are 2, 4, 8, 16, 32, and 64.

  • ci32.png Walsh Code Number —

    Walsh Code Number specifies the Walsh code number of a channel subject to channel specific analysis.

  • ci32.png Branch —

    Branch specifies the Walsh branch of a channel subject to channel specific analysis. The default value is I.

    I (0) Specifies the in-phase branch.
    Q (1) Specifies the quadrature branch.
  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • igenclassrntag.png Instrument Handle Out —

    Instrument Handle Out passes a reference to your RFmx session to the next VI.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.