Related Documentation

The following documents contain information that you may find helpful as you use this help file:

• NI VeriStand Help—Use the NI VeriStand Help, a separate help file you can access from the Windows Start menu, to access information about the configuration-based NI VeriStand environment. These .NET APIs can call into the NI VeriStand environment and programmatically configure it. This help file also includes information about connecting to hardware, extending NI VeriStand with LabVIEW, and creating, modifying, and executing stimulus profiles and real-time sequences from NI VeriStand's integrated Stimulus Profile Editor.
• NI VeriStand Model Framework Introduction—This guide describes how to use the NI VeriStand Model Framework to compile your existing C and C++ model code so you can load your models in NI VeriStand. You can access this guide from the \xxx\ModelInterface\custom directory, where xxx is the directory you specified when you installed the NI VeriStand Model Framework.

  Note  If you did not install the NI VeriStand Model Framework when you installed NI VeriStand, run the NI VeriStand installer again and select NI VeriStand xxxx Model Framework, where xxxx is the NI VeriStand version number, from the list of features to install. You do not need to reinstall NI VeriStand to install the NI VeriStand Model Framework.

• NI VeriStand Readme—This document provides system requirements, installation instructions, and late-breaking information about the version of NI VeriStand that you are installing. The readme.html file is located in the VeriStand directory.
• LabVIEW Help—This help file contains information about using LabVIEW, including its built-in .NET programming capabilities. This help file also includes information about tools, VIs, and functions that you can use in conjunction with .NET functions. The LabVIEW Help also includes the following documentation when you install the associated software:
  • The LabVIEW Real-Time Module documentation.
  • The LabVIEW FPGA Module documentation.
• NI-DAQmx Help
• NI TestStand Help
• NI-XNET Hardware and Software Help
• The documentation for any hardware devices you want to use with a project.
• The MathWorks, Inc. Simulink® software documentation.
• The MathWorks, Inc. MATLAB® software documentation.
• The MathWorks, Inc. Real-Time Workshop® software documentation.

You must have Adobe Reader installed to view PDFs.

Refer to the Adobe Systems Incorporated website at www.adobe.com to download the latest version of Adobe Reader. Refer to the National Instruments Product Manuals Library at ni.com/manuals for updated documentation resources.