Configuring the I/O Pull Resistor
- Updated2024-04-09
- 1 minute(s) read
Configuring the I/O Pull Resistor
Note For Linux users, you
must use Hardware Configuration Utility to configure your instrument as NI-DAQmx for Linux does not include MAX, which
supports only Windows OS.
- Launch MAX.
- In the configuration tree, expand Devices and Interfaces.
- Right-click your device and select Configure.
- In the dialog that appears, click Input Biasing.
- Select the pull resistor for each port and then click OK.
Related Information
- USB-6509 I/O Pull-Up/Pull-Down Resistors
The USB-6509 facilitates user-configurable pull-up or pull-down tasks. Each DIO channel is connected to a 100 kΩ resistor and can be pulled high or low using the switch on the USB-6509 back panel.
- Hardware Configuration Utility