Use the NI PXIe-5611 Calibration VIs to calibrate your PXIe-5611 device. Refer to the calibration procedure for your device for more information about device calibration.

niRFSG 5611 Initialize LO Filter Calibration VI
Generates external calibration constants for calibrating the LO filter DAC.
niRFSG 5611 Configure LO Filter Calibration VI
Configures the device for the next LO filter DAC calibration point and waits for the output signal to settle.
niRFSG 5611 Adjust LO Filter Calibration VI
Calculates calibration information pertaining to the LO filter DAC. This information is based on user-supplied measurements. The calibration information is stored in driver session, and you can later write this information to the device.
niRFSG 5611 Initialize LO Gain Calibration VI
Generates external calibration constants for calibrating the LO gain.
niRFSG 5611 Configure LO Gain Calibration VI
Configures the device for the next LO gain calibration point and waits for the output signal to settle.
niRFSG 5611 Adjust LO Gain Calibration VI
Calculates calibration information pertaining to the LO gain of the device based on user-supplied measurements. The calibration information is stored in the driver session and can later be written to the device.
niRFSG 5611 Initialize Impairment Calibration VI
Initializes an impairment calibration section.
niRFSG 5611 Configure Impairment Calibration VI
Configures the device for the next impairment calibration point and waits for the output signal to settle.
niRFSG 5611 Adjust Impairment Calibration VI
Calculates calibration information pertaining to the impairments of the device based on user-supplied measurements. The calibration information is stored in the driver session and can later be written to the device.
niRFSG 5611 Initialize RF Gain Calibration VI
Generates external calibration constants for calibrating the RF gain.
niRFSG 5611 Configure RF Gain Calibration VI
Configures the device for the next RF gain calibration point and waits for the output signal to settle.
niRFSG 5611 Adjust RF Gain Calibration VI
Calculates calibration information pertaining to the RF gain of the device based on user-supplied measurements. The calibration information is stored in the driver session and can later be written to the device.

Parent topic: External Calibration

NI-RFSG LabVIEW VI Reference