AMPM:AM to AM Enabled
- Updated2025-10-13
- 1 minute(s) read
Specifies whether to enable the results that rely on the AM to AM characteristics.
You do not need to use a selector string to configure or read this property for the default signal instance. Refer to the Selector Strings topic for information about the string syntax for named signals.
The default value is True.
Remarks
The following table lists the characteristics of this property.
| Short Name | AMPM AM to AM Enabled |
| Data type |  |
| Permissions | Read/Write |
| High-level VIs | N/A |
| Resettable | Yes |
| False | 0 | Disables the computation of following scalar results and traces. Empty array is returned if the disabled result is an array. NaN is returned otherwise. The following scalar results are disabled: AMPM Results 1 dB Compression Point AMPM Results Input Compression Point AMPM Results Output Compression Point AMPM Results AM to AM Curve Fit Residual AMPM Results AM to AM Curve Fit Coeff The following traces are disabled: Measured AM to AM Curve Fit AM to AM Relative Power Trace |
| True | 1 | Enables the computation of AM to AM results and traces. |