Returns an array of the absolute and relative power of the lower and upper offset channel.

The relative power is relative to the subblock power. The order of the offsets in the result array is UTRA (1, 2, …k) and NR (1, 2, …n) for Uplink, and EUTRA (1, 2, …m) and NR (1, 2, …n) for Downlink, where k, m, and n are the number of UTRA offsets, number of EUTRA offsets, and number of NR offsets, respectively.

Use "subblock<n>" as the selector string to read results from this VI.


icon

Inputs/Outputs

  • cstr.png Selector String —

    Selector String specifies a selector string comprising of the signal name, result name, and subblock number. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used. The default value is "" (empty string).

    Example:

    "subblock0"

    "signal::sig1/subblock0"

    "result::r1/subblock0"

    "signal::sig1/result::r1/subblock0"

    You can use the RFmxNR Build Subblock String VI to build the selector string.

  • cgenclassrntag.png Instrument Handle In —

    Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

  • cdbl.png Timeout (s) —

    Timeout specifies the timeout for fetching the specified measurement. This value is expressed in seconds. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the VI waits until the measurement is complete. The default value is 10.

  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • i1ddbl.png Upper Absolute Power (dBm or dBm/Hz) —

    Upper Absolute Power returns an array of the upper offset channel power. The carrier power is reported in dBm when you set the ACP Pwr Units property to dBm, and in dBm/Hz when you set the ACP Pwr Units property to dBm/Hz.

  • i1ddbl.png Lower Absolute Power (dBm or dBm/Hz) —

    Lower Absolute Power returns an array of the lower offset channel power. The carrier power is reported in dBm when you set the ACP Pwr Units property to dBm, and in dBm/Hz when you set the ACP Pwr Units property to dBm/Hz.

  • igenclassrntag.png Instrument Handle Out —

    Instrument Handle Out passes a reference of your RFmx session to the next VI.

  • i1ddbl.png Lower Relative Power (dB) —

    Lower Relative Power returns an array of the power in lower (negative) offset channel relative to the total aggregated power. This value is expressed in dB.

  • i1ddbl.png Upper Relative Power (dB) —

    Upper Relative Power returns an array of the power in the upper (positive) offset channel relative to the total aggregated power. This value is expressed in dB.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.