Fetches the absolute powers trace for ACP measurement.


icon

Inputs/Outputs

  • cstr.png Selector String —

    Selector String specifies a selector string comprising of the signal name and the result name. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used. The default is "" (empty string).

    Example:

    "signal::sig1"

    "result::r1"

    "signal::sig1/result::r1"

    You can use the RFmxNR Build Signal String VI to build the selector string.

  • cgenclassrntag.png Instrument Handle In —

    Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

  • cdbl.png Timeout (s) —

    Timeout specifies the timeout for fetching the specified measurement. This value is expressed in seconds. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the VI waits until the measurement is complete. The default value is 10.

  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • igenclassrntag.png Instrument Handle Out —

    Instrument Handle Out passes a reference of your RFmx session to the next VI.

  • i1dcclst.png Absolute Powers (dBm or dBm/Hz) —

    Absolute Powers returns the trace of power measured over the integration bandwidth of the carrier.

  • idbl.png x0 —

    x0 returns the start frequency of the channel. This value is expressed in Hz.

  • idbl.png dx —

    dx returns the frequency bin spacing. This value is expressed in Hz.

  • i1dsgl.png y —

    y returns an array the power measured in each channel. The carrier power is reported in dBm when you set the ACP Pwr Units property to dBm, and in dBm/Hz when you set the ACP Pwr Units property to dBm/Hz.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.