Specifies the rated output power (Prated, x), which is used only to choose the limit table for medium range base station, FR2 Category A and FR2 Category B, and also for NTN supported masks. This value is expressed in dBm.

In the case of FR1, this control is considered when the Link Direction property is set to Downlink, SEM DL Mask Type property to Standard, and gNodeB Category property to Medium Range Base Station. For more details please refer to section 6.6.4.2.3 of 3GPP 38.104 specification. In the case of FR2, this control is considered when the Link Direction property is set to Downlink and SEM DL Mask Type property to Standard. For more details please refer to section 9.7.4.3 of 3GPP 38.104 specification.

If the Band property is set to any NTN (Non-Terrestrial Network) band values 254, 255, 256, Frequency Range property to FR1, Link Direction to Downlink and SEM DL Mask Type property to Standard, then the Rated Output Power (Prated, C, SYS) specifies the sum of rated output powers for all TAB connectors of the carrier for the configured SAN Class. For more details, please refer to section 6.6.4.2 of 3GPP 38.108 specification.

Use "carrier<k>" or "subblock<n>" or "subblock<n>/carrier<k>" as the Selector Strings to read this result.

The default value is 0.

Remarks

The following table lists the characteristics of this property.

Short Name SEM CC Rated Output Power (dBm)
Data type cdbl.png
Permissions Read/Write
High-level VIs N/A
Resettable Yes