ACP:Channel Configuration Type
- Updated2025-10-13
- 1 minute(s) read
Specifies the method to configure the carrier and the offset channel settings.
You do not need to use a selector string to configure or read this property for the default signal instance. Refer to the Selector Strings topic for information about the string syntax for named signals.
The default value is Standard.
Remarks
The following table lists the characteristics of this property.
| Short Name | ACP Channel Configuration Type |
| Data type |  |
| Permissions | Read/Write |
| High-level VIs | N/A |
| Resettable | Yes |
| Standard | 0 | All settings will be 3GPP compliant. |
| Custom | 1 | The user can manually configure integration bandwidth and offset frequencies for the ACP measurement. |
| NS_29 | 2 | This is an additional requirement according to section 6.5F.2.4.2 of 3GPP 38.101-1 and is applicable only for uplink bandwidths of 20 MHz and 40 MHz. |
| Standard Rel 16 | 3 | All settings will be compliant with 3GPP Specifications, Release 16 and above. |
| Standard Rel 18 | 4 | All settings will be compliant with 3GPP Specifications, Release 18 and above. |