Specifies the power class for the UE as specified in section 6.2 of 3GPP 38.101-1/2/3 specification.

This property impacts the spectral flatness mask for uplink.

You do not need to use a selector string to configure or read this property for the default signal instance. Refer to the Selector Strings topic for information about the string syntax for named signals.

The default value is 3.

Remarks

The following table lists the characteristics of this property.

Short Name Pwr Class
Data type ci32.png
Permissions Read/Write
High-level VIs N/A
Resettable Yes
1 1

Specifies the UE capability with maximum transmit power corresponding to Power Class 1 as defined in the 3GPP specification.
2 2

Specifies the UE capability with maximum transmit power corresponding to Power Class 2 as defined in the 3GPP specification.
3 3

Specifies the UE capability with maximum transmit power corresponding to Power Class 3 as defined in the 3GPP specification.
4 4

Specifies the UE capability with maximum transmit power corresponding to Power Class 4 as defined in the 3GPP specification.
5 5

Specifies the UE capability with maximum transmit power corresponding to Power Class 5 as defined in the 3GPP specification.
6 6

Specifies the UE capability with maximum transmit power corresponding to Power Class 6 as defined in the 3GPP specification.
7 7

Specifies the UE capability with maximum transmit power corresponding to Power Class 7 as defined in the 3GPP specification.