Deletes the external attenuation table set by the tableName parameter in the calibration plane specified by the selectorString parameter. On a MIMO session, this method selects the active external attenuation table for the specified MIMO port. The specified table will be used for amplitude correction during measurement. supporteddevices: PXIe-5663/5663E, PXIe-5665, PXIe-5668, PXIe-5644/5645/5646, PXIe-5830/5831/5832/5840/5841/5842/5860

Syntax

Namespace: NationalInstruments.RFmx.InstrMX

public int DeleteExternalAttenuationTable(string selectorString, string tableName)

Parameters

NameTypeDescription
selectorStringstring

Specifies the calibration plane name in which the external attenuation table is stored. This input accepts the calibration plane name with the "calplane::" prefix. If you do not specify the calibration plane name, the default calibration plane instance is used. On a MIMO session, the default "" (empty string) deletes the active external attenuation table for all the MIMO Ports. To delete an external attenuation type for a specific MIMO port, use the port specifier with or without the calplane name. Example: "calplane::plane1/port::myrfsa1/0".
Note

For PXIe-5830/5831/5832 devices, port names should also be specified along with Calplane names. Hence, the valid selector is "calplane::<calplanename>/port::<portname>". If you specify "port::all", all ports are considered configured. For a MIMO port, the valid selector string is "calplane::<calplanename>/port::<devicename>/<channelnumber>/<portname>". If you specify "port::all", all MIMO ports are considered configured. Use RFmxInstrMX.GetAvailablePorts method to get the valid port names.</portname></channelnumber></devicename></calplanename></portname></calplanename>

Example:"""calplane::plane0""calplane::plane0/port::if0""port::if0""calplane::plane0/port::all""calplane::plane0/port::myrfsa1/0""calplane::plane0/port::myrfsa1/0, port::myrfsa2/0""calplane::plane0/port::myrfsa1/0/if0"

tableNamestring

Specifies the name to be associated with external attenuation table within a calibration plane. Provide a unique name, such as "table1" to configure the table.

Returns

Returns the status code of this method. The status code either indicates success or describes a warning condition.