Deletes all the external attenuation tables in the calibration plane specified by the selectorString parameter. On a MIMO session, this method deletes all the external attenuation tables for the specified MIMO port. supporteddevices: PXIe-5663/5663E, PXIe-5665, PXIe-5668, PXIe-5644/5645/5646, PXIe-5830/5831/5832/5840/5841/5842/5860

Syntax

Namespace: NationalInstruments.RFmx.InstrMX

public int DeleteAllExternalAttenuationTables(string selectorString)

Parameters

NameTypeDescription
selectorStringstring

Specifies the calibration plane name in which either S-parameter or external attenuation table is stored. This input accepts the calibration plane name with the "calplane::" prefix. If you do not specify the calibration plane name, the default calibration plane instance is used. On a MIMO session, the default "" (empty string) deletes all the external attenuation tables for all MIMO Ports. To delete an external attenuation type for a specific MIMO port, use the port specifier with or without the calplane name. Example: "calplane::plane1/port::myrfsa1/0".
Note

For PXIe-5830/5831/5832 devices, port names should also be specified along with Calplane names. Hence, the valid selector is "calplane::<calplanename>/port::<portname>". If you specify "port::all", all ports are considered configured. For a MIMO port, the valid selector string is "calplane::<calplanename>/port::<devicename>/<channelnumber>/<portname>". If you specify "port::all", all MIMO ports are considered configured. Use RFmxInstrMX.GetAvailablePorts method to get the valid port names.</portname></channelnumber></devicename></calplanename></portname></calplanename>

Example:"""calplane::plane0""calplane::all""calplane::plane0/port::if0""port::if0""calplane::plane0/port::all""calplane::all/port::all""calplane::plane0/port::myrfsa1/0""calplane::plane0/port::myrfsa1/0, port::myrfsa2/0""calplane::plane0/port::myrfsa1/0/if0"

Returns

Returns the status code of this method. The status code either indicates success or describes a warning condition.