Specifies the amplitude settling accuracy value. This value is expressed in decibels. RFmx waits until the RF power attains the specified accuracy level after calling the RFmx Initiate function.

Syntax

RFMXINSTR_ATTR_AMPLITUDE_SETTLING

Numeric Value

Data Type

Access

Applies To

56

float64

Read/Write

N/A

Remarks


Any specified amplitude settling value that is above the acceptable minimum value is coerced down to the closest valid value.

You do not need to use a selector string if you want to configure this attribute for all signal instances. Specify the signal name in the selector string if you want to configure or read that signal instance. Refer to the Selector String topic for information about the string syntax.

Supported Devices: PXIe-5644/5645/5646, PXIe-5820/5830/5831/5832/5840/5841/5842/5860