RFmxCDMA2k SEM Fetch Upper Offset Power VI

Selector String specifies a selector string comprising of the signal name, result name, and offset number. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used.

Examples:

"offset0"

"signal::sig1/offset0"

"result::r1/offset0"

"signal::sig1/result::r1/offset0"

You can use the RFmxCDMA2k Build Offset String VI to build the selector string.

Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

Timeout specifies the timeout for fetching the specified measurement. This value is expressed in seconds. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the VI waits until the measurement is complete. The default value is 10.

error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

Relative Peak Power returns the peak power in the upper (positive) offset segment relative to the carrier absolute integrated power.

Peak Frequency returns the frequency at which the peak power occurred in the offset segment. This value is expressed in Hz.

Instrument Handle Out passes a reference to your RFmx session to the next VI.

Absolute Integrated Power returns the upper (positive) offset segment power measured.

Relative Integrated Power returns the power in the upper (positive) offset segment relative to the carrier absolute integrated power.

Absolute Peak Power returns the peak power measured in the upper (positive) offset segment. The power is measured in dBm.

error out contains error information. This output provides standard error out functionality.