RFmxCDMA2k ModAcc Fetch Detected Channel VI

Selector String specifies a selector string comprising of the signal name, result name, and channel number. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used.

Examples:

"channel0"

"signal::sig1/channel0"

"result::r1/channel0"

"signal::sig1/result::r1/channel0"

You can use the RFmxCDMA2k Build Channel String VI to build the selector string.

Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

Timeout specifies the timeout for fetching the specified measurement. This value is expressed in seconds. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the VI waits until the measurement is complete. The default value is 10.

error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

Instrument Handle Out passes a reference to your RFmx session to the next VI.

Detected Walsh Code Length returns the detected Walsh code length.

Detected Walsh Code Number returns the detected Walsh code number.

Detected Branch returns the detected branch.

I (0)	The signal modulated on the in-phase branch.
Q (1)	The signal modulated on the quadrature branch.
I and Q (2)	The signal modulated on the in-phase branch and quadrature branch.

error out contains error information. This output provides standard error out functionality.