Specifies whether the measurement is performed from the frame, slot, or symbol boundary.

You do not need to use a selector string to configure or read this property for the default signal instance. Refer to the Selector Strings topic for information about the string syntax for named signals.

The default value is Slot.

Remarks

The following table lists the characteristics of this property.

Short Name CDA Sync Mode
Data type ci32.png
Permissions Read/Write
High-level VIs RFmxCDMA2k CDA Configure Synchronization Mode and Interval
Resettable Yes
Frame 0

The frame boundary is detected, and the measurement is performed over the number of slots specified by the CDA Meas Length property starting at the CDA measurement offset slots from the frame boundary.
Slot 1

The slot boundary is detected, and the measurement is performed over the number of slots specified by the CDA Meas Length property starting at the CDA measurement offset slots from the slot boundary.
Arbitrary 2

The symbol boundary is detected, and the measurement is performed over the number of slots specified by the CDA Meas Length property starting at the CDA measurement offset slots from the symbol boundary.