Specifies the radio configuration for the channel.

You do not need to use a selector string to configure or read this property for the default signal instance. Refer to the Selector Strings topic for information about the string syntax for named signals.

The default value is RC3.

Remarks

The following table lists the characteristics of this property.

Short Name Radio Configuration
Data type ci32.png
Permissions Read/Write
High-level VIs RFmxCDMA2k Configure Radio Configuration
Resettable Yes
RC1 0

If Link Direction property is set to Uplink, Radio configuration 1 includes 64-ary orthogonal modulation, reverse fundamental channel (R-FCH), and reverse supplemental code channels (R-SCCHs).

If Link Direction property is set to Downlink, Radio Configuration 1 includes binary phase-shift keying (BPSK), forward fundamental channels (F-FCHs) and forward supplemental channels (F-SCHs).
RC2 1

If Link Direction property is set to Uplink, Radio configuration 2 includes 64-ary orthogonal modulation, R-FCH, and R-SCCHs.

If Link Direction property is set to Downlink, Radio Configuration 2 includes BPSKs, F-FCHs and F-SCHs.
RC3 2

If Link Direction property is set to Uplink, Radio configuration 3 includes BPSK, R-FCH, and reverse supplemental channels (R-SCHs).

If Link Direction property is set to Downlink, Radio Configuration 3 includes quadrature phase-shift keying (QPSK), F-FCHs and F-SCHs.
RC4 3

If Link Direction property is set to Uplink, Radio configuration 4 includes BPSK, R-FCH, and R-SCHs.

If Link Direction property is set to Downlink, Radio Configuration 4 includes QPSK, F-FCHs and F-SCHs.
RC5 4

If Link Direction property is set to Uplink, Radio configuration 5 is not supported and gives invalid results.

If Link Direction property is set to Downlink, Radio Configuration 5 includes QPSK, F-FCHs and F-SCHs.