FetchOffsetMeasurement(string, double, out double, out double, out double, out double)
- Updated2025-10-13
- 1 minute(s) read
Returns the absolute and relative powers measured in the specified offset channel. The relative powers are measured relative to the carrier absolute power.
Use "offset(n)" as the selector string to read results from this method.
Syntax
Namespace: NationalInstruments.RFmx.Cdma2kMX
public int FetchOffsetMeasurement(string selectorString, double timeout, out double lowerRelativePower, out double upperRelativePower, out double lowerAbsolutePower, out double upperAbsolutePower)
Parameters
| Name | Type | Description |
|---|---|---|
| selectorString | string | Specifies a selector string comprising of the result name, and offset number. If you do not specify the result name, the default result instance is used. |
| timeout | double | Specifies the timeout for fetching the specified measurement. This value is expressed in seconds. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the method waits until the measurement is complete. |
| lowerRelativePower | out double | Upon return, contains the lower offset channel power measured relative to the carrier absolute power. This value is expressed in dB. |
| upperRelativePower | out double | Upon return, contains the upper offset channel power measured relative to the carrier absolute power. This value is expressed in dB. |
| lowerAbsolutePower | out double | Upon return, contains the lower offset channel absolute power. |
| upperAbsolutePower | out double | Upon return, contains the upper offset channel absolute power. |
Returns
Returns the status code of this method. The status code either indicates success or describes a warning condition.