GetIQPowerEdgeTriggerSlope(string, out RFmxCdma2kMXIQPowerEdgeTriggerSlope)
- Updated2025-10-13
- 1 minute(s) read
Gets whether the device asserts the trigger when the signal power is rising or when it is falling. The device asserts the trigger when the signal power exceeds the specified level with the slope you specify. This method is used only when you set the SetTriggerType(string, RFmxCdma2kMXTriggerType) method to IQPowerEdge.
Syntax
Namespace: NationalInstruments.RFmx.Cdma2kMX
public int GetIQPowerEdgeTriggerSlope(string selectorString, out RFmxCdma2kMXIQPowerEdgeTriggerSlope value)
Remarks
This method gets the value of IQPowerEdgeTriggerSlope attribute.The default value is Rising.
Parameters
| Name | Type | Description |
|---|---|---|
| selectorString | string | Pass an empty string. The signal name that is passed when creating the signal configuration is used. |
| value | out RFmxCdma2kMXIQPowerEdgeTriggerSlope | Upon return, contains whether the device asserts the trigger when the signal power is rising or when it is falling. The device asserts the trigger when the signal power exceeds the specified level with the slope you specify. This method is used only when you set the SetTriggerType(string, RFmxCdma2kMXTriggerType) method to IQPowerEdge. |
Returns
Returns the status code of this method. The status code either indicates success or describes a warning condition.