Fetches TXP measurement results for enhanced data rate (EDR) packets.


icon

Inputs/Outputs

  • cstr.png Selector String —

    Selector String specifies a selector string comprising of the signal name and the result name. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used. The default value is "" (empty string).

    Example:

    "signal::sig1"

    "result::r1"

    "signal::sig1/result::r1"

    You can use the RFmxBT Build Signal String VI to build the selector string.

  • cgenclassrntag.png Instrument Handle In —

    Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

  • cdbl.png Timeout (s) —

    Timeout specifies the timeout for fetching the specified measurement. This value is expressed in seconds. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the VI waits until the measurement is complete. The default value is 10.

  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • igenclassrntag.png Instrument Handle Out —

    Instrument Handle Out passes a reference to your RFmx session to the next VI.

  • idbl.png EDR GFSK Average Power Mean (dBm) —

    EDR GFSK Average Power Mean returns the average power of the GFSK portion of the EDR packet. When you set the TXP Averaging Enabled property to True, it returns the mean of the GFSK average power results computed for each averaging count. This value is expressed in dBm.

  • idbl.png EDR DPSK Average Power Mean (dBm) —

    EDR DPSK Average Power Mean returns the average power of the DPSK portion of the EDR packet. When you set the TXP Averaging Enabled property to True, it returns the mean of the DPSK average power results computed for each averaging count. This value is expressed in dBm.

  • idbl.png EDR DPSK GFSK Average Power Ratio Mean (dB) —

    EDR DPSK GFSK Average Power Ratio Mean returns the ratio of the average power of the DPSK portion to the average power of the GFSK portion of the EDR packet. When you set the TXP Averaging Enabled property to True, it returns the mean of the DPSK GFSK average power ratio results computed for each averaging count. This value is expressed in dB.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.