RFmxBT ModAcc Fetch Frequency Error wi+w0 Trace (EDR) VI

Selector String specifies a selector string comprising of the signal name and the result name. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used. The default value is "" (empty string).

Example:

"signal::sig1"

"result::r1"

"signal::sig1/result::r1"

You can use the RFmxBT Build Signal String VI to build the selector string.

Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

Timeout specifies the timeout for fetching the specified measurement. This value is expressed in seconds. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the VI waits until the measurement is complete. The default value is 10.

error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

Instrument Handle Out passes a reference to your RFmx session to the next VI.

Time returns an array of time instances corresponding to the start of the 50us blocks of the EDR portion of EDR packet at which the frequency error values are computed. This value is expressed in seconds.

Frequency Error wi+w0 returns the array of frequency errors wi+w0 computed over the packet. This value is expressed in Hz.

error out contains error information. This output provides standard error out functionality.