Fetches the overall ACP measurement status based on the measurement limits as defined by the standard if you set the ACP Offset Channel Mode property to In-Band. This VI is not valid if you set the ACP Offset Channel Mode property to Symmetric.


icon

Inputs/Outputs

  • cstr.png Selector String —

    Selector String specifies a selector string comprising of the signal name and the result name. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used. The default value is "" (empty string).

    Example:

    "signal::sig1"

    "result::r1"

    "signal::sig1/result::r1"

    You can use the RFmxBT Build Signal String VI to build the selector string.

  • cgenclassrntag.png Instrument Handle In —

    Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

  • cdbl.png Timeout (s) —

    Timeout specifies the timeout for fetching the specified measurement. This value is expressed in seconds. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the VI waits until the measurement is complete. The default value is 10.

  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • igenclassrntag.png Instrument Handle Out —

    Instrument Handle Out passes a reference to your RFmx session to the next VI.

  • ii32.png Measurement Status —

    Measurement Status returns the overall measurement status based on the measurement limits specified by the standard when you set the ACP Offset Channel Mode property to In-Band. Refer to ACP Results Meas Status property for more information about measurement status.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.