Packet
- Updated2025-04-08
- 1 minute(s) read
Groups
Group members
| Name | Description |
|---|---|
| RFMXBT_ATTR_ACCESS_ADDRESS | Specifies the 32-bit LE access address. |
| RFMXBT_ATTR_BANDWIDTH_BIT_PERIOD_PRODUCT | Specifies the bandwidth bit period product of GFSK modulation for LE-CS packet type. |
| RFMXBT_ATTR_DATA_RATE | Specifies the data rate of the LE, LE-CS or LE-HDT packet transmitted by the device under test (DUT). This value is expressed in bps. This attribute is applicable only to LE, LE-CS or LE-HDT packet type. |
| RFMXBT_ATTR_PACKET_TYPE | Specifies the type of the Bluetooth packet to be measured. |
| RFMXBT_ATTR_PAYLOAD_BIT_PATTERN | Specifies the bit pattern present in the payload of the packet. This value is used to determine the set of ModAcc measurements to be performed. |
| RFMXBT_ATTR_PAYLOAD_LENGTH | Specifies the payload length of the signal in bytes. This attribute is applicable only when you set the RFMXBT_ATTR_PAYLOAD_LENGTH_MODE attribute to Manual. This attribute returns the payload length used for measurement if you set the Payload Length Mode attribute to Auto. |
| RFMXBT_ATTR_PAYLOAD_LENGTH_MODE | Specifies the payload length mode of the signal to be measured. The payload length mode and RFMXBT_ATTR_PAYLOAD_LENGTH attributes decide the length of the payload to be used for measurement. |
Attachments
None