Attributes

Specifies the expected carrier frequency of the RF signal that needs to be acquired. This value is expressed in Hz. The signal analyzer tunes to this frequency.

Specifies the RF channel number of the signal generated by the device under test (DUT), as defined in the bluetooth specification. This attribute is applicable when you enable the ACP measurement and when you set the RFMXBT_ATTR_ACP_OFFSET_CHANNEL_MODE attribute to In-band.

Specifies the attenuation of a switch (or cable) connected to the RF IN connector of the signal analyzer. This value is expressed in dB.

Specifies the reference level that represents the maximum expected power of the RF input signal. This value is expressed in dBm for RF devices and V_pk-pk for baseband devices.

Specifies the margin RFmx adds to the RFMXBT_ATTR_REFERENCE_LEVEL attribute. The margin avoids clipping and overflow warnings if the input signal exceeds the configured reference level.

Specifies the time, in seconds, to wait before results are available in the RFmxBT Attribute. Set this value to a time longer than expected for fetching the measurement. A value of -1 specifies that the RFmxBT Attribute waits until the measurement is complete.

Specifies the instrument port to be configured to acquire a signal. Use RFmxInstr_GetAvailablePorts function to get the valid port names.